User manual ADEMCO 4110DL
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ADEMCO 4110DL. We hope that this ADEMCO 4110DL user guide will be useful to you.
You may also download the following manuals related to this product:
ADEMCO 4110DL 9-96 (172 ko)
Manual abstract: user guide ADEMCO 4110DL
Detailed instructions for use are in the User's Guide.
[. . . ] Previous Menu
Security System
User's Manual
4110DL/4110XM
N5100V5 9/96
TABLE OF CONTENTS
SYSTEM OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the message "AC LOSS" or "NO AC" is displayed, and the POWER indicator (if present) is off, the Keypad is operating on battery power only. If only some lights are out on the premises, check circuit breakers and fuses and reset or replace as necessary. CALL FOR SERVICE IMMEDIATELY if AC power cannot be restored.
27
(continued)
Other Displays
TROUBLE CONDITIONS
dl: If this remains displayed for more than 1 minute, your system is disabled. CC: The system is in communication with the central station for change of function or status verification. If this message persists for more than 10 minutes, CALL YOUR SERVICE COMPANY. O C The keypad is not receiving signals from the control panel and sees an open circuit. If this message persists for more than 10 minutes, CALL YOUR SERVICE COMPANY.
FOR SERVICING INFORMATION, SEE PAGE 43
28
FIRE ALARM SYSTEM
IF INSTALLED
General Your fire alarm system (if installed) is on 24 hours a day, for continuous protection. In the event of an emergency, the strategically located smoke and heat detectors will automatically send signals to your system, triggering a loud, interrupted sound from the Keypad. An interrupted sound will also be produced by optional exterior sounders. A FIRE message will appear at your Keypad and remain on until you silence the alarm. Should you become aware of a fire emergency before your detectors sense the problem, go to your nearest Keypad and manually initiate an alarm by pressing the panic key pair assigned as FIRE emergency (if programmed by the installer) as indicated on page 23. If flames and/or smoke are present, leave the premises and notify your local Fire Department immediately. If no flames or smoke are apparent, investigate the cause of the alarm. The zone number(s) of the zone(s) in an alarm condition will be displayed at the Keypad.
TYPICAL "FIRE EMERGENCY" DISPLAY
In Case Of Fire Alarm
ALARM FIRE CHECK
05
SUPV NO AC PHONE TEST NOT READY CHIME BAT INSTANT TAMPER
FIXED-WORD
29
(continued)
Silencing Fire Alarms
FIRE ALARM SYSTEM
IF INSTALLED
1. Silence the alarm by pressing the OFF key (security code not needed to silence fire alarms). To clear the display, enter your code and press the OFF key again (Memory of Alarm). If the Keypad does not indicate a READY condition after the second OFF sequence, press the READY key to display the zone(s) that are faulted. Be sure to check that smoke detectors are not responding to smoke or heat producing objects in their vicinity. If this does not remedy the problem, there may still be smoke in the detector. When the problem has been corrected, clear the display by entering your code and pressing the OFF key.
30
NATIONAL FIRE PROTECTION ASSOCIATION RECOMMENDATIONS ON SMOKE DETECTORS
General With regard to the number and placement of smoke/heat detectors, we subscribe to the recommendations contained in the National Fire Protection Association's Standard #74 noted below. Early warning fire detection is best achieved by the installation of fire detection equipment in all rooms and areas of the premises as follows: A smoke detector installed outside of each separate sleeping area, in the immediate vicinity of the bedrooms and on each additional story of the family living unit, including basements and excluding crawl spaces and unfinished attics. In addition, it is recommended that the owner consider the use of heat or smoke detectors in the living room, dining room, bedroom(s), kitchen, hallway(s), attic, furnace room, utility and storage rooms, basements and attached garages.
7 7
TV ROOM KITCHEN
7
DINING
KITCHEN
v
7 s
v
BEDROOM BEDROOM
DINING
7
BDRM BDRM
7
v s
BEDROOM
s LIVING ROOM 7 s
7 7
7
LIVING ROOM
7
BEDROOM
BEDROOM
s
TO BR
7
BEDROOM
7 s Smoke Detectors for Minimum Protection 7 Smoke Detectors for Additional Protection v Heat-Activated Detectors
BEDROOM
s
LVNG RM
v
KTCHN
v .
CLOSED DOOR GARAGE
s
BASEMENT
31
EMERGENCY EVACUATION
Steps to Safety
M ET OO OS DR CL BE
M M OO OO TH DR DR BA BE BE
2ND FLOOR
EN CH KIT BACK DOOR M OO DR BE
OM TH RO BA ED B
1ST FLOOR
· ·
BACK
·
FRONT
Establish and regularly practice a plan of escape in the event of fire. [. . . ] The most common cause of an alarm system not functioning when an intrusion or fire occurs is inadequate maintenance. This alarm system should be tested weekly to make sure all sensors and transmitters are working properly. Wireless transmitters (used with some systems) are designed to provide long battery life under normal operating conditions. Longevity of batteries may be as much as 4 to 7 years, depending on the environment, usage, and the specific wireless device being used. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ADEMCO 4110DL
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ADEMCO 4110DL will begin.