User manual ART ART416

[. . . ] ART Model 416 Six Channel Personal Mixer with EQ and EFX The ART Model 416 Six Channel Personal Mixer quickly and easily combines six sources ­ three microphones (or balanced line inputs) and three stereo line inputs into a single stereo line-level mix. It has effects patching and phantom power (included to activate condenser microphones or active DI boxes). [. . . ] Once the 416 is connected to the main mixer, tape deck or computer sound card and you are running a test, set the EFX LOOP IN/OUT button on the front panel to the IN position and adjust the LEVEL control for the desired effects intensity. g) The L and R EFX LOOP RETURN jacks may alternately be used as a stereo line input with its own level control and in/out button. h) Connect either the 1/4 inch LEFT and RIGHT OUT jacks or the RCA REC OUT jacks to the input of the mixer, tape deck or computer with the appropriate unbalanced, shielded cables. i) Switch on the power and set the MASTER LEVEL to the _ way setting, then adjust the channel LEVEL controls as required for the best mix and level while checking the MICROPHONE channel CLIP LEDs for activity. k) Re-adjust the MASTER LEVEL as required for best signal level. WARRANTY INFORMATION Limited Warranty Applied Research and Technology will provide warranty and service for this unit in accordance with the following warrants: Applied Research and Technology, (A R T) warrants to the original purchaser that this product and the components thereof will be free from defects in workmanship and materials for a period of one year from the date of purchase. Applied Research and Technology will, without charge, repair or replace, at its option, defective product or component parts upon prepaid delivery to the factory service department or authorized service center, accompanied by proof of purchase date in the form of a valid sales receipt. Exclusions: This warranty does not apply in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs. This warranty is void if the serial number is altered, defaced, or removed. A R T reserves the right to make changes in design or make additions to or improvements upon this product without any obligation to install the same on products previously manufactured. A R T shall not be liable for any consequential damages, including without limitation damages resulting from loss of use. Some states do not allow limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights and you may have other rights, which vary, from state to state. For units purchased outside the United States, an authorized distributor of Applied Research and Technology will provide service. Service: The following information is provided in the unlikely event that your unit requires service. Check to make sure that all cables are connected correctly, and the cables themselves are in working condition. [. . . ] Customer Service hours are 9:00 AM to 5:30 PM Eastern Time, Monday through Friday. APPLIED RESEARCH & TECHNOLOGY 215 TREMONT STREET ROCHESTER, NEW YORK 14608 USA (585) 436-2720 (585) 436-3942 ­ Fax www. artproaudio. com E-mail: cserve@artproaudio. com [. . . ]