User manual ASROCK 754BRIDGE

[. . . ] 2GB Hardware Monitor: CPU Temperature Sensing CPU Overheat Shutdown to Protect CPU Life (ASRock U-COP) CPU Fan Tachometer 754Bridge Installation To install 754Bridge into the K8 Bridge on ASRock motherboards that support future CPU upgrade function (e. [. . . ] STEP 4: Adjust the jumper settings on ASRock motherboard to fit with the requirement for AMD 754-pin CPU installation. STEP 6: Insert an add-on 754Bridge into the K8 Bridge on ASRock motherboards that support future CPU upgrade function by matching the set of gold fingers on 754Bridge with the set of K8 Bridge on ASRock Motherboard (matching short gold finger with short K8 Bridge, and long gold finger with long K8 Bridge). STEP 8: Ensure to connect the power supply with ATX 12V plug to the ATX 12V Power Connector (ATX12V1) on 754Bridge. 5-in) 8 CPU_FAN1 DDR1 (64/72 bit, 184-pin module) DDR2 (64/72 bit, 184-pin module) 1 ATX12V1 7 DDR400 2 3 VIA K8T800 Chipset 4 1 2 3 4 5 6 7 8 2 x 184-pin DDR DIMM Slots CPU Heatsink Retention Module 754-Pin CPU Socket North Bridge Controller Gold Finger Gold Finger ATX 12V Power Connector (ATX12V1) CPU Fan Connector (CPU_FAN1) 754 Bridge 5 OnBoard Connectors Please connect the CPU fan cable to this connector and match the black wire to the ground pin. [. . . ] Inserte un 754Bridge de complemento en el puente K8 de las placas madre ASRock con soporte para la función de actualización a CPU Future haciendo que el grupo de gold fingers del 754Bridge coincida con el grupo de gold fingers del puente K8 en la placa madre ASRock (agrupando el gold finger corto con el puente de K8, y el gold finger largo con el puente de K8 largo). [. . . ]