User manual ASROCK EP2C602

[. . . ] IPMI Configuration Guide 1. 2. Introduction of Megarac SP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Megarac SP GUI Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction of Megarac SP Megarac SP allows remote access of computers with BMC (Baseboard Management Controllers) and IPMI (Intelligence Platform Management Interface). System administrators may easily monitor system health or manage computer events of remote computers via the web based Megarac SP GUI using standard Internet browsers. 2 2. Megarac SP GUI Overview 2. 1 Login page The default username and password are both “admin”. [. . . ] Reset Click “Reset” to reset the modified changes. 26 2. 5. 9 Network Link Configuration This page is used to configure the network link configuration for available network interfaces. LAN Interface Select the required network interface from the list to which the Link speed and duplex mode is to be configured. Auto Negotiation This option is enabled to allow the device to perform automatic configuration to achieve the best possible mode of operation (speed and duplex) over a link. Link Speed Link speed will list all the supported capabilities of the network interface. • - Half Duplex • - Full Duplex 27 Save Click ‘Save’ to save the settings. Reset Click ‘Reset’ to reset the modified changes. 28 2. 5. 10 NTP Settings This page displays the device’s current Date & Time Settings. It can be used to configure either Date & Time or NTP (Network Time Protocol) server settings for the device. NOTE: As a year 2038 problem exists, the acceptable date range is from 01-01-2005 to 01-18-2038. Check the ‘Automatically synchronize’ option to configure the NTP Server. The NTP Server will support the following: • - IP Address (Both IPv4 and IPv6 format). UTC Offset UTC Offset list contains the UTC offset values for the NTP server, which 29 can be used to display the exact local time. Automatically synchronize Check this option to automatically synchronize Date and Time with the NTP Server. Refresh Click ‘Refresh’ to reload the current date & time settings. Reset Click ‘Reset’ to reset the modified changes. 30 2. 5. 11 PAM Ordering This page is used to configure the PAM order for user authentication into the BMC. PAM Module It shows the list of available PAM modules supported in BMC. Click on the ‘Move Up’ option to move the selected PAM module one step before the existing PAM module. Click on the ‘Move Down’ option to move the selected PAM module one step after the existing PAM module. NOTE: Whenever the configuration is modified, the web server will be restarted automatically. The logged session will be logged out. 31 Reset Click ‘Reset’ to reset the modified changes. 32 2. 5. 12 PEF Management This page is used to configure the Event Filter, Alert Policy and LAN Destination. NOTE: Free slots are denoted by ‘~’ in all columns for the slot. For more information, refer the Platform Event Filtering (PEF) section in IPMI Specification. Event Filter Click the Event Filter tab to show configured Event filters and available slots. [. . . ] The various fields of Recorded Video are given below: # : The serial number. Play Video Select a video and click the Play Video button to play the video file in the Java Application. Download Select a video and click the Download button to download and save the video file in the client machine. Delete Click the Delete button to delete the selected video file. 52 2. 8 Maintenance 2. 8. 1 Preserve Configuration Check which configurations need to be preserved, while Restore Factory Defaults is done. [. . . ]