User manual ASROCK PE PRO-HT

[. . . ] PE Pro-HT User Manual Version 1. 0 Published January 2003 Copyright©2003 ASRock INC. All rights reserved. 1 Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. Disclaimer: Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual. [. . . ] USB header (9-pin USB45) (see p. 6 item 13) 1 GND P+4 P-4 USB_PWR USB_PWR P-5 P+5 GND DUMMY ASRock I/OTM already provided 4 default USB ports. If the 4 USB ports on the rear panel are not sufficient, an USB header is available for 2 additional USB ports. This connector supports an optional wireless transmitting and receiving infrared module. Infrared module connector (5-pin IR1) (see p. 6 item 14) IRTX +5V DUMMY 1 GND IRRX Internal audio connectors (4-pin CD1, 4-pin AUX1) (CD1: see p. 6 item 24) (AUX1: see p. 6 item 23) CD-R GND GND CD-L CD1 AUX-R GND GND AUX-L AUX1 These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, DVD-ROM, TV tuner card, or MPEG card. Front panel audio connector (9-pin AUDIO1) (see p. 6 item 20) 1 GND +5VA BACKOUT-R BACKOUT-L This is an interface for front panel audio cable that allows convenient connection and control of audio devices. AUD-OUT-L DUMMY AUD-OUT-R MIC-POWER MIC System panel connector (9-pin PANEL1) (see p. 6 item 12) 1 PLED+ PLEDPWRBTN# GND This connector accommodates several system front panel functions. DUMMY RESET# GND HDLEDHDLED+ 12 Speaker connector (4-pin SPEAKER 1) (see p. 6 item 15) Chassis fan connector (3-pin CHA_FAN1) (see p. 6 item 9) CPU fan connector (3-pin CPU_FAN1) (see p. 6 item 3) ATX power connector (20-pin ATXPWR1) (see p. 6 item 1) 1 SPEAKER DUMMY DUMMY +5V This connector allows you to attach to an external speaker. GND +12V CHA_FAN_SPEED Connect the fan cable to the connector matching the black wire to the ground pin. Connect the fan cable to the connector matching the black wire to the ground pin. Connect an ATX power supply to the connector. GND +12V CPU_FAN_SPEED 13 Chapter 3 BIOS Setup 3. 1 BIOS Setup Utility This section explains how to configure your system using the BIOS Setup Utility. When you start up the computer, there is a chance for you to run the BIOS Setup. Press <F2> during the Power-On-Self-Test (POST) to enter the BIOS Setup Utility, otherwise, POST continues with its test routines. If you wish to enter the BIOS Setup after POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system chassis. It is a menu-driven program, which allows you to scroll through its various sub-menus and select among the predetermined choices. Because the BIOS software is constantly being updated, the following BIOS setup screens and descriptions are for reference purpose only, and may not exactly match what you see on your screen. 3. 1. 1 BIOS Menu Bar The top of the screen has a menu bar with the following selections: MAIN Sets up the basic system configuration ADVANCED Sets up the advanced features SECURITY Sets up the security features POWER Configures Power Management features BOOT Configures the default system device that is used to locate and load the Operating System EXIT Exits the current menu or the BIOS Setup To access the menu bar items, press the right or left arrow key on the keyboard until the desired item is highlighted. 3. 1. 2 Legend Bar At the bottom of the Setup Screen is a legend bar. The following table lists the keys in the legend bar with their corresponding functions. 14 Navigation Key(s) <F1> <ESC> / / +/<Enter> <F9> <F10> Function Description Displays the General Help Screen Jumps to the Exit menu or returns to the upper menu from the current menu Moves cursor up or down between fields Selects menu to the left or right Increases or decreases values Brings up a selected menu for a highlighted field Resets the current screen to its Setup Defaults Saves changes and exits Setup 3. 2 Main Menu When you enter the BIOS Setup Utility, the following screen appears. AMIBIOS SETUP UTILITY - VERSION 3. 31a Boot Power Exit Main Advanced Security [ System Date System Time Floppy Drives IDE Devices BIOS Version Processor Type Processor Speed Cache Size Microcode Update Total Memory DDR1 DDR2 SDR1 SDR2 Setup Help ] Dec 25 2002 Wed 14:07:40 Month: Jan - Dec Day: 01 - 31 Year: 1980 - 2099 PE Pro-HT BIOS P1. 00 Pentium (R) 4 Family CPU 2100 MHz 512 KB F23 / 08 256 MB 256 MB / 333 MHz None None None F1:Help Esc:Exit :Select Item :Select Menu +/-:Change Values Enter:Select Sub-Menu F9:Setup Defaults F10:Save & Exit System Date [Month/Day/Year] Set the system date that you specify. Valid values for month, day, and year are Month: (Jan to Dec), Day: (1 to 31), Year: (up to 2099). System Time [Hour:Minute:Second] Set the system to the time that you specify. IDE Devices Use this to configure IDE devices. 15 AMIBIOS SETUP UTILITY - VERSION 3. 31a Main Primary IDE Master: [ Auto Setup Help ] Type Cylinders Heads Write Precompensation Sectors Maximum Capacity LBA Mode Block Mode Fast Programmed I/O Modes 32 Bit Transfer Mode Ultra DMA Mode Select how to set the parameters of drive, Or Select [AUTO] to set all HDD parameters automatically. 0 Mb Off Off Auto Off Auto F1:Help Esc:Previous Menu :Select Item +/-:Change Values Enter:Select Sub-Menu F9:Setup Defaults F10:Save & Exit TYPE It allows user to select the type of the IDE Drive. After making your selections on this sub-menu, press <ESC> key to return to the upper menu, in which the hard disk drive field will display the size for the hard disk drive that you configured. [USER]: It allows user to manually enter the number of cylinders, heads, and sectors per track for the drive. Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk. If auto-detection is successful, the BIOS Setup automatically fills in the correct values for the remaining fields on this sub-menu. If the autodetection fails, it may due to that the hard disk is too old or too new. If the hard disk was already formatted on an older system, the BIOS Setup may detect incorrect parameters. In these cases, select [User] to manually enter the IDE hard disk drive parameters. [. . . ] If you already have a password, you must enter your current password first in order to create a new password. If you already have a password, you must enter your current password first in order to create a new password. 22 Password Check: Select the check point for "Password Check". If [Setup] option is selected, the "Password Check" is performed before BIOS setup. If [Always] option is selected, the "Password Check" is performed before both boot-up and BIOS Setup. 3. [. . . ]