User manual AT&T CL81219

[. . . ] User's manual CL81219 DECT 6. 0 cordless telephone with caller ID/ call waiting Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information on pages 51-52 of this manual. Please thoroughly read this user's manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www. telephones. att. com or call 1 (800) 222-3111. [. . . ] 883-2445 1-883-2445 While reviewing the call log, press # repeatedly to Press 1 show different dialing options for local and long 888-883-2445 distance numbers before dialing or saving the 1-888-883-2445 telephone number in the directory. Press 1 repeatedly if you need to add or remove 1 in front of the telephone number before dialing or saving it in the directory. When the number shows in the correct format for dialing, press PHONE/FLASH or SPEAKER to call the number. 33 Caller ID Caller ID history Dial a call log entry 1. Delete entries · Press MUTE/DELETE to delete the shown entry from the caller ID history. Press qCID or DIRp to scroll to >DEL ALL CALLS, then press MENU/SELECT. 4. press MENU/SELECT to clear the caller ID history of all entries, or press OFF/CLEAR to exit and leave all entries in the caller ID history intact. · Press and hold REDIAL/PAUSE to insert a dialing pause (p appears). · Copy a number from the redial list by pressing REDIAL/PAUSE then qCID or DIRp, or by pressing REDIAL/PAUSE repeatedly to select a number. · If the entry is already saved in the directory, the handset shows ALREADY SAVED. · If there is no caller ID information, the handset shows UNABLE TO SAVE. NOTES: 1. You might need to change how a caller ID number is dialed if the entry does not appear in the correct format. Caller ID numbers might appear with an area code that might not be necessary for local calls, or without a 1 that might be necessary for long distance calls (page 33). 34 Caller ID Reasons for missing caller ID information There are also occasions when other information or no information shows for various reasons: On-screen message PRIVATE NUMBER PRIVATE NAME PRIVATE CALLER Reason The caller prefers not to show the phone number. Your telephone service provider cannot determine the caller's number. Your telephone service provider cannot determine the caller's name. Your telephone service provider cannot determine the caller's name and telephone number. Calls from other countries may also generate this message. UNKNOWN NUMBER UNKNOWN NAME UNKNOWN CALLER 35 Appendix A Alert tones and lights Screen icons Battery status - battery is charging (animated display). Battery status - low battery (flashing); place handset in telephone base or charger to recharge. NEW VOICEMAIL - there are new voicemail from the telephone service provider. NEW 10:01 AM MUTE 11/23 NEW MUTE Missed and new calls. Microphone is off. Handset alert tones Two short beeps Four short beeps Three beeps Three rising tones You are pressing the qCID or DIRp keys when the volume is already at its highest or lowest setting. The system has completed the command successfully. Lights IN USE On when the handset is in use or when you are registering a handset. Flashes when another telephone is in use on the same line, or when you are deregistering handset(s) from the telephone base. [. . . ] NOTE: Before calling for service, please review the user's manual; a check of the PRODUCT controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the PRODUCT(s) to the service location. The manufacturer will return repaired or replaced PRODUCT under this limited warranty to you. The manufacturer assumes no risk for damage or loss of the PRODUCT in transit. [. . . ]