User manual AT&T E5934

[. . . ] User's Manual 5. 8 GHz Cordless Telephone/Answering System E5933B/E5934B with Caller ID/Call Waiting Congratulations on your purchase of this AT&T product. Before using this telephone system, please read Important safety instructions on pages 49 to 51 of this manual. NEEDHELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call toll free 1(800)222-3111 In Canada, call 1(866)288-4268 or visit our web site at www. telephones. att. com Model #: Product name: Serial #: (found on the bottom of the telephone base) Purchase date: Place of purchase: E5933B/E5934B 5. 8GHz Cordless Telephone/Answering System IMPORTANT Information about caller ID with call waiting This product has a caller ID with call waiting feature that works with service from your local phone service provider. Caller ID with call waiting lets you see who is calling before you answer the phone, even when you're on another call. Contact your telephone service provider if: · You have both caller ID and call waiting, but as separate services (you may need combined service). [. . . ] Elapsed time while recording a memo (see page 34) or announcement up to 90 seconds (page 30). Displayed for one second when any answering system setting is turned on or off. Current number of rings while setting (see page 32). 10-99 1-8 1-99 (counting) 99 (flashing) F (flashing) CL (flashing) A --- (flashing) On (or) OF 02, 04, 06, tS 35 1. When system answers, enter two-digit remote access code (19 unless you have changed it). Hang up to end call and save all undeleted messages. Answering system operation Remote access A two-digit security code is required to access your answering system from any touch-tone phone. This code is 19 by default; see page 32 to change it. Play all messages 3. 4. 1 2 Press to hear all messages. Play new messages Delete the message Press to hear new messages. Press 3 during playback to delete current message. When the answering system is in idle status, press 3 twice to delete all old messages. Press during the beginning of the day and time announcement to go back to the previous caller's message. Press 5 to stop recording. 3 33 4 Repeat or go back Stop 5 NOTE: If you pause for more than 10 seconds during remote access, you will hear a help menu listing all features & commands. If you issue no command for another 20 seconds, the call will end automatically. Skip to next message 6 Review announcement #7 Record announcement *7to begin recording 5to stop recording Record memo 8to begin recording 5to stop recording Review remote access code #9 *9 Press # 9 to review remote access code. Change remote access code Press * 9 to change remote access code, then enter desired remote access code from 10-99. 36 Answering system operation Remote access Help menu *5 0 0 Press to hear list of features & commands. Enter your access code, then press 0 to turn it on. Turn system off Turn system on 37 Appendix Screen icons, indicator lights & tones Screen icons & alert tones Screen icons Ringer off. Battery charging (animated display). HANDSET 1 MUTE NEW 11/23 Low battery (flashing); place handset in base or charger to recharge. MUTE NEW 10:01 AM Microphone is muted. Missed and un-reviewed calls. Handset alert tones Two short beeps Four short beeps Two beeps Press VOLUME keys while the volume levels are already at limits. Out of range during off-hook. Confirmation tone Programming command completed successfully. Base tones One beep every 10 seconds A series of beeps Message Alert. Press VOLUME keys while the volume levels are already at limits. Indicator lights ANSWER ON/OFF On when answering system is on and ready to receive calls. IN USE CHARGE On when handset is in use or you are registering a handset. Flashes when another phone is in use on the same line, or answering system is answering an incoming call, or you are de-registering a handset from the base. On when handset is in the charger of the telephone base and charging. SPEAKER 38 On when speakerphone is in use. Appendix Handset display screen messages Screen display messages PHONE ENDED CALL LOG EMPTY The handset is in use. You are accessing an empty call log. DIRECTORY EMPTY You are accessing an empty directory. LIST FULL MUTED SPEAKER LOW BATTERY INCOMING CALL NEW VOICE MAIL You are saving to a full directory. There are new voice mail messages. XX MISSED CALLS There are new calls in the CID log. ** PAGING ** HANDSET X IS CALLING LINE IN USE NO LINE ALREADY SAVED SAVED WARNING CHECK BATTERY!The telephone number you have entered is already stored in the directory. [. . . ] The limited warranty period for the product extends for ONE (1) YEAR from the date of purchase. If AAT repairs or replaces a materially defective product under the terms of this limited warranty, this limited warranty also applies to repaired or replacement products for a period of either (a) 90 days from the date the repaired or replacement product is shipped to you or (b) the time remaining on the original one-year limited warranty, whichever is longer. 54 Appendix Limited warranty 4. This limited warranty does not cover: · product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; or · product that has been damaged due to repair, alteration, or modification by anyone other than an authorized service representative of AAT; or · product to the extent that the problem experienced is caused by signal conditions, network reliability or cable or antenna systems; or · product to the extent that the problem is caused by use with non-AAT accessories; or · product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or · product purchased, used, serviced, or shipped for repair from outside the United States, or used for commercial or institutional purposes (including but not limited to products used for rental purposes); or · product returned without valid proof of purchase (see 6 below); or · charges for installation or setup, adjustment of customer controls, and installation or repair of systems outside the unit. To obtain warranty service in the United States of America, call 1-800-222-3111 (In Canada, please dial 1-866-288-4268) for instructions regarding where to return the product. [. . . ]