Detailed instructions for use are in the User's Guide.
[. . . ] COl\tl1\1UNICATIONS
caRp.
Cordless Telephone . 900MHz Digital . Caller ID . Digital Answering System
, /--"'
, "
-, --.
\
/
\ I /
I. -
. . ~. . :. ~~~ , I
\~;, \UDIO'. OX
-. -, --~
~
. . . .
)
'0
~
---1
(0:. <C>~~'1:>-0
-c::::. :-c::::.
-I
<!0 <0
~
~
0;;:1
IMPORTANT:
REVIEW INSTRUCTIONS
BEFORE OPERATION
,
:::::fi!
. ;-c ~:', , 1. "'~. :. "';;;:. '?'. , , '" , )-:. :, "';:;. , :;. . ,
~.
;~
. ~"fl:. ;, , '!!t.
Page 1 2 3 4 7 9 12 14 15 16 17 18 19 21 22 22 22 22 22 23
INTRODUCTION Special Features Parts Check List FCC AND IC REGULATIONS IMPORTANT SAFETY INSTRUCTIONS REPLACING THE BATTERY PACK GETTING STARTED WALL MOUNTING EXAMPLES OF THE HANDSET DISPLAY THE HANDSET LAYOUT THE BASE UNIT LAYOUT , . [. . . ] . To cancel the pager either press ~~ on the Base Unit, or press ~ on the Handset.
-i
DT94102. p65
21
6/24/98, 12:20 PM
II
rF
Call Waiting CALL WAITING is a subscription service, available from most local telephone service providers. While you are on a call, you will hear an alert signal, warning that a second caller is trying to reach you. . . :.
If you subscribe to this service linked with CALLER ID (CID), the name and/ or phone number of the second caller can be displayed on the Handset immediately after hearing the CALL WAITING alert. Switching calls using FLASH . To switch over to the new call, press the@:!5]key; the first call is put on hold. . To switch back to the first call, press the @:!5] key again.
First, dial the call normally. Then activate the Temporary Tone feature by pressing TONE (the * key). You can then press the numbers or symbols you need, and your phqne will send the proper signals. The phone will automatically go back to rotary (PULSE) service.
I -(ft-
-fJj>-
Programming
Ringer
.
The handset ringer is capable of four different types of ringer tones. The following sections detail how to select different ringer types and how to turn off the handset ringer.
Temporary Tone If you have rotary (PULSE) telephone service (TONE/PULSE switch is set to PULSE), this feature allows you to temporarily switch to TONE dialing for such purposes as remote access to answering machines, bank-by-phone services, use of calling cards and other special services. 12:20 PM
-~
rF
--, c, :;~".
, . -, . . . ~l. . . '"!~~DVANeED. '
jm, irii
Changing Ringer Types To program, the handset must be OFF.
T o select following: a different ringer type do the
-"N'
;;,
a Visual Message Waiting Indication generated by many phone service providers. If you subscribe to Voicemail service from your local telephone company. the DT 941 CI will display the following data to alert you to new, unplayed messages:
Once you have reviewe. d your new messages, the MSG. WAITING indication will be cleared from the display. ~ ~ 1 for ringer type 2 for ringer type 3 for ringer type 4 for ringer type The handset LCD will show type selected, " for example Press: Press: Press: You can temporarily clear the Message Waiting screen. Press and Hold LCD DISPLAYS: (CLA/QEIJ until the
~
1 2 3 4 the ringer
+
Pres~o
confirm your decision.
any key other the operation. than ~
Press ~
Message
or ~
Waiting
to exit.
Pressing will cancel
TheMSG. WAITING afertmay reappear, as long as unplayed messages remain in your Voicemail box.
Your Dr 941 CI is capable of detecting
23
6124/98. 12:20 PM I--r=
OT94102. p65
23
.
Turning Off The Ringer To turn off the ringer do the following:
Clear/Delete
(CLR/DEL)
i<~y!. -.
c
The CLEAR and DELETE functions can be accessed separately depending on how long the key is held down. For example, to clear the last di~!t entere~ on the display, press thelCLR/OELJ key for less than 1 second. Press and hold the (CLR/DEL) key for more than 1 second to completely clear the display.
Checking The Ringer Type To test the present ringer type, do the following:
The delete function is also used to delete Caller ID (CID) records, memory dial records, and Message Waiting indication. See DELETIN. G STORED NUMBERS, DELETING NUMBERS and MESSAGE WAITING.
Advanced Dialing i ':'~c
I -@I
There are two different ways to dial a number: 1. Then dial the number you want either manually, using MEMORY (MEM) dialing, Caller ID (CJD) dialing or REDIAL.
+
2. [. . . ] Call your local telephone company.
YOU GET NOISE, STATIC, OR A WEAK SIGNAL EVEN WHEN YOU'RE NEAR THE BASE UNIT . . Household appliances plugged into the same circuit as the base unit can sometimes cause interference. Try moving the appliance or the base unit to another outlet.
ringer activated. . Make sure the telephone line cord is plugged firmly into the base unit and the telephone jack. [. . . ]