User manual B&W CCM636 DATASHEET

[. . . ] CCM 636 See nothing, hear everything The CCM 636 is a ceiling speaker distinguished by its adjustable tilt offset 25mm (1 in) soft dome tweeter. [. . . ] CCM 636 is a classically simple and cost effective route to high quality ceiling mount sound. Technical Specification Technical features Three-position EQ switch Adjustable offset tilt soft dome tweeter Swing-out dog fixings 2-way in-ceiling speaker system 1x ø25mm (1 in) soft dome high-frequency 1x ø165mm (6. 5 in) woven fibreglass mid/bass -6dB at 40Hz and 30kHz 50Hz-22kHz ±3dB on reference axis 89dB spl (2. 83V, 1m) 8 (minimum 3. 0) 3. 2kHz 20W - 130W continuous into 8 on unclipped programme Diameter: 232mm (9. 1 in) Diameter: 205mm (8. 1 in) 103mm (4. 1 in) from ceiling surface 1. 5kg (3. 3lb) Semi-matt white suitable for customising or pre-painting (paint mask included) Pre-mount kit for new construction (PMK c65) Description Drive units Frequency range Frequency response Sensitivity Nominal impedance Crossover frequency Recommended amplifier power Frame size Cut-out size Min depth req Net weight Finish Accessories ©2005 B&W Group Ltd. CCM 636 Architectual and Engineering Specifications The loudspeaker system shall be of the mono-amped 2-way type comprising of a single flush mountable circular enclosure containing one 6. 5in bass-mid driver with woven glass fibre cone and one offset mounted adjustable tilt 1in textile dome tweeter with 3 position EQ switch. Performance specifications of a typical production unit shall meet or exceed the following: Frequency response shall be 50 ­ 22kHz ± 3dB. Total power handling shall be 130W continuous into 8 Ohm on unclipped programme. Sensitivity measured with 2. 83V at 1-meter distance on axis, mean averaged between 50 ­ 22kHz shall be 89dB. External dimensions shall be 232mm (9. 1in) diameter x 107mm (4. 2in) depth. No other system shall be acceptable unless the above combined performance are equalled or exceeded. [. . . ] B&W Group Ltd reserves the right to amend details of the specifications without notice in line with technical developments. [. . . ]