User manual BAUKNECHT UXT5436ADS

[. . . ] Overly accumulated grease in old duct work should be cleaned out or duct work should be replaced if necessary to avoid the possibility of a grease fire. Check all joints on duct work to insure proper connection and all joints should be properly taped. Without these components, operating blowers could catch on to hair, fingers and loose clothing. [. . . ] The three light indicators to the right of this switch indicate the selected speed. The first indicator light is low speed, the second is medium speed, the third is high speed. Do not use corrosive or abrasive detergent, or steel wool/scouring pads which will scratch and damage surface. After cleaning, you may use non-abrasive stainless steel polish/cleaners, to polish and buff out the stainless luster and grain. Residue and grease from cooking will collect in the residue cup located inside the range hood, behind the perforated diffuser panels. Models UXT5430AD* & UXT5436AD* hoods are designed with a self cleaning feature. the centrifugal blower system automatically liquefies cooking residue accumulated in its internal housing , and deposits the residue in the cleaning cup. Nevertheless, grease from cooking can also dry and adhere in the internal housing. Running the self clean function periodically will flush out accumulated residue in the range hood's internal housing. Cleaning Frequency: Cleaning should be completed approximately once a month under normal use. detergent: Non-corrosive , non-abrasive grease cutting spray detergents are recommended. With nozzle on `spray', squirt the grease cutting detergent through the safety grill directly onto blower blades 10-15 times. (If desired, repeat above steps with water to rinse out detergent) DO NOT touch bulb until switched off and cooled. If bulbs are difficult to turn due to prolonged use, firmly attach a glass suction cup approx. Or to order bulbs, please call our service center: 1-800-688-9900 (USA) or 1-800-688-2002 (Canada) For one (1) year from the original retail purchase date, any part which fails in normal home use will be repaired or replaced free of charge. Any repair, modification, alteration, or adjustment not authorized by the manufacturer or an authorized servicer. [. . . ] If the dealer or service company cannot resolve the problem, write to Maytag ServicesSM, Attn:CAIR® Center, P. Box 2370, Cleveland, TN 37320-2370, or call 1-800-688-9900 USA or 1-800-688-2002 CANADA. Customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080. [. . . ]