User manual BOSCH TDA7640GB

[. . . ] These instructions contain valuable information about the unique features of this iron and some hints to make ironing easier for you. Please visit www. bosch-home. co. uk for more product information or to register your product, just follow the link to the Online guarantee registration. Before using the iron for the first time Please carry out the following steps: 1. Remove the protective cover from the soleplate before using the iron. 2. While the iron is unplugged, fill the water tank (E) with tap water 3. Plug the appliance into the mains and set the temperature control (H) to the “max” position by lining it up with the pointer (G) on the iron. [. . . ] • The electrical plug must not be removed from the socket by pulling the cable. • Do not leave the appliance exposed to weather conditions (rain, sun, frost, etc. ) • With the aim of avoiding dangerous situations, any work or repair that the appliance may need, e. g. replacing a faulty mains cable, must only be carried out by qualified personnel from an Authorised Technical Service Centre. Cleaning and Maintenance Attention !For general cleaning, follow the information below: Problem Dirty/lightly marked iron body or soleplate Mark develops on soleplate during use Heavily stained soleplate Solution Clean the body of iron or soleplate with a damp cloth then dry it. Rub the iron a few times over with a dry cotton cloth folded several times. Then dampen a cloth with water and wipe the soleplate clean and dry thoroughly. DO NOT de-scale or clean the water tank with cleaning products or solvents, as these could cause the iron to drip when using the steam function. DO NOT use a “professional steam cleaner” for cleaning the appliance. DO NOT use sharp objects or abrasive products to clean the soleplate or any other part of the appliance. To keep the soleplate in good condition, do not allow it to come into contact with metal objects. GUARANTEE TERMS The terms of the guarantee for this appliance are in accordance with that stated by our representative for the country in which it is sold. Details of those conditions can be obtained from the retailer from whom the appliance was purchased. The SALES RECEIPT must be presented when making any claims against the terms of this guarantee. We reserve the right to make technical modifications. Important This appliance has been designed exclusively for domestic use and must not be used for industrial purposes. Carefully read through the operating instructions for the appliance and safeguard them for future reference. Using Your Iron 1. Setting the temperature The temperature control (H) adjusts the temperature of the soleplate (F). 1. Check the temperature instructions shown on the care label of the garment you are ironing and set the temperature control (H) to the corresponding position by lining it up with the pointer (G) on the iron: Fabric Synthetics Silk - Wool Cotton - Linen F. Ironing with steam The steam regulator (C) is used to adjust the amount of steam produced when ironing. 2. Adjust the temperature setting and then set the steam regulator according to the table below. Steam will automatically be produced: Temperature Setting Temperature Setting • •• ••• •• Note: At a temperature setting of “•”, the soleplate is not hot enough to produce steam so the steam regulator should be set to the position to avoid water dripping from the soleplate (F). Ironing with shot of steam ••• to “max” Steam Regulator Setting L. The addition of other liquids, such as perfume, will damage the appliance. Any damage caused by the use of the aforementioned products, will make the guarantee void. [. . . ] When the appliance is first plugged in, this function will be inactive for the first 2 minutes to allow it to reach the set temperature. If during ironing, the iron is not moved for a certain length of time, the iron will automatically switch off. The length of time will depend on the position the iron has been left in: Horizontally (flat) or on its side: 30 seconds Vertically (upright): 8 minutes The pilot light on the top of the handle (M) will flash when auto shut-off has been activated. Fabric protection soleplate cover (“protect”) Some irons in this range are equipped with a fabric protection soleplate cover The fabric protector is used for steam-ironing delicate garments at maximum temperature without damaging them. [. . . ]