User manual BOSCH TDS3570GB

[. . . ] The iron does not • The boiler is not switched on or the • Set the switch to the on (“I”) produce any steam. t • The water tank is not fitted onto • Fit the water tank back onto the steam tank correctly. • The steam regulator is set to the • Increase the steam flow by minimum position. The ironed garment • The selected temperature is • Select a suitable temperature turns dark and/ too high and has damaged the for the material being ironed or sticks to the garment. [. . . ] • This appliance reaches high temperatures and produces steam during use, this could cause scalds or burns. • If the safety fuse fitted in the appliance blows the appliance will be rendered inoperative. To restore normal operation the appliance will have to be taken to an authorised Technical Service Centre. When placed on its support, make sure that the surface on which the support stands is stable. • Do not use the iron if it has been dropped, shows visible signs of damage or if it is leaking water. It will have to be checked by an authorised Technical Service Centre before it can be used again. • Do not allow the cord to come into contact with the soleplate when it is hot. • The iron pad (2) can be placed into the specially designed recess on the appliance or somewhere suitable alongside the ironing area. Never rest the iron back on the steam generator without the iron pad!. Description 1. Removable water tank 2. Removable iron pad 3. ”Water empty”/ “Clean warning (*)” pilot light 4. ”Steam ready”/ “Auto shut-off (*)” pilot light 5. Variable steam control 6. «Energy saving» button (*) 7. Steam hose 8. Illuminated main power 0/I button 9. Housing with internal steam generator 10. Mains plug 11. Mains cable with storage facility 12. Steam hose clip 13. Temperature dial 14. Iron pilot light 15. Iron steam release button 16. Soleplate 17. “Calc’n clean” opening Getting Started 1. Remove any label or protective covering from the soleplate (16). You may remove the iron pad from the appliance and place the iron on it on another solid, stable, horizontal surface. 3. Remove the detachable water tank (1) and fill it, making sure not to overfill it. 4. Press the steam release button (15 ) to release steam. Additional features (Model dependent) Intelligent steam Important: 4. Fit the water tank back onto the steam tank. 6. Set the main power button (8 ) to the on (“I”) position. 7. The ”Steam ready” indicator lamp (4) will light up after several minutes, indicating that the appliance is ready to use. The steam generator will take more time to reach ”Steam ready” state only upon the initial heating up, or after performing the de-scaling operation (Calc’n clean). When water is already present in the steam generator during regular use, heat up time to reach the operating temperature will be faster. • The steam hose may get hot if you are ironing for long periods. • While the steam release button is pressed, the water tank may produce a pumping sound, this is normal, indicating that water is being pumped to the steam tank. [. . . ] 3. Place the iron on the iron pad, standing it on its sole plate (16). 4. Empty the water tank (1) and store/wrap the mains cable onto the cord storage facility (11). Tidy the steam hose (7) onto the handle of the iron using the steam hose clip provided (12). Do not wrap the cords too tight Advice on disposal Our goods come in optimised packaging. [. . . ]