User manual BOSCH TDS4570GB

[. . . ] En Thank you for buying the sensixx B45L steam station, the new steam-ironing system from Bosch. Carefully read through the operating instructions for the appliance and keep them safe for future reference. Uk for more product information or to register your product, just follow the link to the Online guarantee registration. €¢ If the safety fuse fitted in the appliance blows, the appliance will be rendered inoperative. [. . . ] Check the ironing instruction label on the garment to determine the correct ironing temperature. Select the required ironing temperature setting: Temperature icon on display Suitable for Any type of fabric which can be ironed. synthetics Silk – Wool Cotton – Linen  en 3. The selected temperature icon will flash while the soleplate (16) is heating and will stop flashing as soon as the soleplate has reached the selected temperature. Tips: • Sort your garments out based on their cleaning symbol labels, always starting with clothes that have to be ironed at the lowest temperatures. €¢ If you are not sure what the garment is made of then begin ironing at a low temperature and decide on the correct temperature by ironing a small section not usually seen when worn. If you find that water is dripping out of the soleplate, set the temperature to a higher position (take care that the garment can be ironed on this heat temperature setting). €¢ At the beginning of each use, it is possible that drops of water will be dispensed alongside steam. Therefore, it is advisable to try the iron on the ironing board or a piece of cloth to start with. €œPulse steam” function* This appliance has a special function for tackling difficult creases. the “Pulse steam” function helps soften stubborn garments like jeans or linen faster. When the steam release button is activated, the steam generator will release three powerful shots of steam so that the steam reaches even deeper into the fabric. Or (model dependent) Quickly press the steam release button (13) on the bottom of the handle twice (double-click) Remarks: • It is possible to stop the shots of steam by quickly pressing the steam button again. €¢ Some water drops may appear when you use the “Pulse steam” function for the first time. Ironing with steam (C) The steam control is used to adjust the amount of steam produced when ironing. By default, the steam station automatically chooses the “auto” steam setting. The steam setting can be changed by the user by changing the temperature. The steam station will propose the suitable steam level automatically depending on the temperature selection made. Temperature icon on display Steam setting If necessary, the steam level can be adapted to your needs by touching the (8). Icon on the display The water drops will disappear after you have used the function for some time. Ironing without steam This enables the iron to be used for dry ironing. Begin ironing but without pressing the steam release buttons (13-14*). [. . . ] • Use tap water mixed 50% with distilled or demineralised water. To prolong the optimum steam function, mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. €¢ Set the main power button (9) to the “I” position (illuminated in red), and/or fill the water tank. [. . . ]