User manual CANON IMAGERUNNER 2500 BROCHURE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CANON IMAGERUNNER 2500. We hope that this CANON IMAGERUNNER 2500 user guide will be useful to you.


CANON IMAGERUNNER 2500 BROCHURE: Download the complete user guide (1652 Ko)

Manual abstract: user guide CANON IMAGERUNNER 2500BROCHURE

Detailed instructions for use are in the User's Guide.

[. . . ] 2 Attach the multi-purpose tray cover to prevent dust accumulating inside the machine. Ë Paper width guide Multi-purpose tray cover Ë Attach the handset cradle to the machine. 1 Insert the plugs with pins into the holes on the handset cradle. Plug with pin NOTE · Do not push the pins all the way into the plugs at this stage. 2 Turn the machine so that the left side is facing you. 3 Insert the plugs (with the handset cradle) into the holes on the machine. 4 Carefully push the pins into the plugs as far as they will go. NOTE · If the pins are not pushed fully into the plugs, the handset cradle will not be securely attached to the machine. Connect the handset and telephone line cord. Connect external devices as follows: = Telephone line jack = External device jack = Handset jack · Telephone or answering machine Telephone or answering machine Telephone line Machine Telephone line cord Connect the supplied cord to the L jack. [. . . ] External device (optional) Connect the cord of an extension telephone, answering machine or data modem to the t jack. Connect the handset cord to the h jack. · Telephone and answering machine LINE TEL Telephone Telephone line Answering machine Machine · Built-in computer modem and telephone LINE TEL Telephone Computer Telephone line Machine NOTE · You must complete all the steps in this document to receive faxes properly. Connect the power cord. When the power cord is plugged into the machine and into the wall outlet, the machine is turned on. The LCD returns to the standby display when you install the FX-3 S Cartridge. NOTE · The machine does not have a power switch. Install the FX-3 S Cartridge. 1 Lift the latch and open the front cover. 2 Remove the FX-3 S Cartridge from its protective bag. 3 Gently rock the cartridge from side to side a few times to distribute the toner evenly inside it. ·Print quality may be poor if the toner is unequally distributed. NOTE · Do not open the drum protective shutter on the cartridge. 4 Place and hold the cartridge on a flat, clean surface, then gently pull the plastic tab straight out to remove the plastic seal. NOTE · Use a firm, even pull to remove the seal. TOP VIEW PULL WITHIN THIS RANGE SIDE VIEW PULL WITHIN THIS RANGE 5 Hold the cartridge by its handle and insert it into the machine as far as it will go, making sure that its side tabs are aligned with the guides inside the machine. Type D:\SETUP. EXE (if your CD-ROM drive is drive D:) in the command line and click OK. 3 Click Install Printer Driver to start installation. 4 Follow the on-screen instructions to complete the installation process. During installation, follow these guidelines: · Click Next or Yes to move from one dialog box to the next. · If the Digital Signature Not Found screen appears, click Yes to continue. 5 When prompted, remove the label from the USB port on the back of the machine. Then connect the USB cable to the machine and your computer. USB label USB cable USB port 6 When the system displays messages indicating that the driver for your printer is being installed, proceed as follows: For Windows 98/Me: Wait for the system to complete the installation of the printer driver. For Windows 2000: When the Found New Hardware Wizard appears during the setup, choose the following: · Search for a suitable driver for the printer. [. . . ] Then connect the USB cable to the machine and your computer. USB label USB cable USB port 6 When the system displays messages indicating that the driver for your printer is being installed, proceed as follows: For Windows 98/Me: Wait for the system to complete the installation of the printer driver. For Windows 2000: When the Found New Hardware Wizard appears during the setup, choose the following: · Search for a suitable driver for the printer. (Do not display a list of drivers. ) · Search only on the installation disk. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CANON IMAGERUNNER 2500




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CANON IMAGERUNNER 2500 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.