User manual CANON OFERTA APARATÓW DSC 2H2010 BROCHURE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CANON OFERTA APARATÓW DSC 2H2010. We hope that this CANON OFERTA APARATÓW DSC 2H2010 user guide will be useful to you.


CANON OFERTA APARATÓW DSC 2H2010 BROCHURE: Download the complete user guide (3896 Ko)

Manual abstract: user guide CANON OFERTA APARATÓW DSC 2H2010BROCHURE

Detailed instructions for use are in the User's Guide.

[. . . ] The Mains plug shall remain readily operable to disconnect the plug in case of an accident. While using the compact power adapter, do not wrap it or cover it with a piece of cloth, and do not place it in confined narrow spaces. Heat may build up, the plastic case may deform and it could result in electric shock or fire. Use of CV-250F DV cable is necessary to comply with the technical requirement of EMC Directive. European Union (and EEA) only. [. . . ] 13 levels (-6 to 6) are available; set higher levels to detect a wider color range. 13 levels (-6 to 6) are available; set higher levels to detect brighter areas. [HUE]: Recording Activating the Selective Noise Reduction MENU ( 25) CAMERA SETUP SELECTIVE NR EFFECT LEVELOFF 1. Select a setting option and close the menu. You can select the strength of the effect from low, middle or high. appears. 69 Clear Scan This feature allows you to record a computer's CRT screen or other equipment without displaying black band or flicker on the screen. You can adjust the frequency from 50. 2 Hz to 200. 3 Hz. MENU ( 25) CAMERA SETUP CLEAR SCAN50. 2Hz 1. Select [CLEAR SCAN], adjust the frequency and close the menu. Adjust the frequency so that the black band does not appear. SHUTTER dial 70 Custom Keys You can assign frequently used functions to the custom keys. The custom keys can have different functions assigned to them in each of the operating modes. Default settings: CUSTOM KEY 1 CUSTOM KEY 2 TIME CODE INDEX WRITE TV SCREEN DATA CODE ZEBRA TV SCREEN TV SCREEN CVF+LCD BW To check the current custom key settings: In a recording mode: Open the menu and select [DISPLAY SETUP/ menu. In a playback mode: Open the menu and select [DISPLAY SETUP/ The following functions can be assigned to the custom keys: ]. Select [CUSTOM KEY], set it to [ON] and close the menu. Time code Index write 2 Zebra pattern VCR stop 2 TV screen Time code hold 2 Audio level Viewfinder and LCD B&W mode Zebra pattern TV screen Viewfinder and LCD B&W mode MAGN. LOCK button lock CP backward key 1, 2 SDI output 3 Focus limit Image stabilizer Output channel CP backward key 1, 2 SDI output 3 Focus limit Image stabilizer Output channel Time code TV screen Data code Audio level Time code hold 2 Viewfinder and LCD B&W mode SDI output 3 Output channel TV screen Viewfinder and LCD B&W mode SDI output 3 Recording Can only be assigned to Custom Key 2. Press the button again to cancel it. [IMAGE STAB] Image Stabilizer ( 52) Press the CUSTOM KEY (1 or 2) button. The image stabilizer is activated. Press the button again to cancel it. [OUTPUT CH] Output Channel ( 81) headphone terminal) will change each time the button is Press the CUSTOM KEY (1 or 2) button. The audio channel being output (A/V1 terminal, pressed. 74 Color Bars/Audio Reference Signal You can generate and record color bars signals and a 1 kHz audio reference signal. With the customized functions ( 95) you can choose between EBU ([TYPE 1]) and SMPTE color bars ([TYPE 2]) and you can also select the strength of the audio signal (-12 dB, -18 dB, or -20 dB). 1. Select the standard of the color bars signal [COLOR BARS] and the strength of the audio reference signal [1kHz TONE] with the customized functions ( 95). Set the OUTPUT switch to BARS. The color bars appear and the audio reference signal is emitted (if activated). If you set [1kHz TONE] to [OFF] the current audio input (microphone, line in, etc. ) will be recorded as the audio signal. OUTPUT switch Recording 75 External Connections Video Signal Output Standards The standard of the video signal output from the HD/SD SDI ( only), HD/SD COMPONENT OUT and HDV/DV terminals depends on the standard used for recording (or the standard of the recording on the tape being played back) and on various menu settings. Video output from the VIEWFINDER COMPONENT OUT, A/V1, or VIDEO 2 terminal will always be in 576/50i standard. Standard of Video Output while Recording While recording in high definition, video output from the HD/SD SDI terminal will be an uncompressed HD, YPbPr signal. You can down-convert the video output with the respective menu settings. Recording standard and frame rate HD 50i HD 25F SD (50i, 25F) HD/SD SDI terminal1 Unchanged 1080/50i 1080/50i 576/50i Downconverted2, 5, 6 576/50i 576/50i8 HD/SD COMPONENT OUT terminal Unchanged 1080/50i 1080/50i 576/50i Downconverted3, 5 576/50i 576/50i8 HDV/DV terminal 1080/50i 1080/25p 576/50i Standard of Video Output during Playback When playing back a tape recorded in HDV standard, video output from the HD/SD SDI terminal will be a signal modified from the HDV video. You can down-convert the video output with the respective menu settings. Standard of the tape HDV 1080/50i HDV 1080/25p DV 576/50i 1 2 3 4 5 6 7 8 [LETTERBOX] setting [OFF] [ON] [OFF] [ON] [OFF]/[ON] HD/SD SDI terminal1 HD/SD COMPONENT OUT terminal DownDownUnchanged Unchanged converted2, 5 Converted3, 5 1080/50i 576/50i 576/50i 1080/50i8 576/50i 8 576/50i 576/50i 1080/50i 576/50i 576/50i HDV/DV terminal DownUnchanged Converted4, 7 1080/50i 1080/25p 576/50i 576/50i 576/50i 1080/50i8 576/50i 8 576/50i 576/50i only. [. . . ] 24 24 120 122 111 118 121 141 122 Memory card cannot be played back. Image cannot be erased. The dial or / (card/tape) switch are not set to the correct position. On an SDHC or SD memory card, the writeprotect switch is set to the locked position. flashes red. Card error occurred. About the LCD screen The LCD screen is produced with extremely high-precision manufacturing techniques, with more than 99. 99% of the pixels operating to specification. Less than 0. 01% of the pixels may occasionally misfire or appear as black, red, green or blue dots. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CANON OFERTA APARATÓW DSC 2H2010




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CANON OFERTA APARATÓW DSC 2H2010 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.