User manual CANON PIXMA MG3120 BROCHURE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CANON PIXMA MG3120. We hope that this CANON PIXMA MG3120 user guide will be useful to you.


CANON PIXMA MG3120 BROCHURE: Download the complete user guide (1658 Ko)

You may also download the following manuals related to this product:

   CANON PIXMA MG3120 MG3100 SERIES USER MANUAL (OS X 10.6/10.7/10.8) (8 ko)
   CANON PIXMA MG3120 MG3100 SERIES MANUAL DE USUARIO (OS X 10.4/10.5) [SPANISH VERSION] (8 ko)
   CANON PIXMA MG3120 MG3100 SERIES MANUAL DE USUARIO (OS X 10.6/10.7/10.8) [SPANISH VERSION] (8 ko)

Manual abstract: user guide CANON PIXMA MG3120BROCHURE

Detailed instructions for use are in the User's Guide.

[. . . ] · When printing for the first or second time after setup, the print will take a minute or two before it becomes ready to print. Note If the ALARM lamp on the printer flashes orange after you have closed the Top Cover, refer to "ALARM Lamp Flashes Orange" in "Troubleshooting" of the Quick Start Guide. Rear Tray Loading Paper Caution There may be some transparent or light blue ink on the inside of the bag the print head comes in, or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on yourself when handling these items. If the air hole is blocked with the remaining film, ink may leak out or may not eject properly. b Remove the orange protective cap from the Print Head and discard it. Electrical Contacts Print Head Nozzles Important If the Top Cover is left open for more than 10 minutes, the Print Head Holder moves to the right. Close and reopen the Top Cover to return the Holder to the center. b Twist off and discard the orange Protective Cap Do not press! protective cap located on the bottom of the ink tank. f Make sure that the Print Head is installed correctly. b Plug the power cord in the back of the Ink Port Front Tray printer and connect the other end to the wall outlet. Loading Paper in the Rear Tray a Load the paper into the Rear Tray b Align the paper stack against the with the print side facing UP. [. . . ] c Pinch the Paper Guide and slide it against the left side of the paper stack. Note Make sure that the Cover Guide is set upright when you load paper in the Rear Tray. Print side facing UP. Cover Guide Hardware setup is complete. Electrical Contacts Important · Do not touch the electrical contacts. · Do not touch the ink port. c Insert the ink tank into the right-hand Important · Do not connect the USB cable until after the software is installed. · Plug the power cord all the way in, since it may be difficult to plug. Protective Cap slot and press the mark on the ink tank until it clicks into place. Note Do not touch the print head nozzles and the electrical contacts. c Press the POWER button to turn on the printer. c Firmly raise the Print Head Lock Lever until it stops. The Print Head Lock Lever may feel heavy. Important Be sure that the Print Head Lock Lever is pressed all the way down, and that the Print Head is locked firmly in place. If the Print Head is tilted forward, or the Print Head Lock Lever is pressed only halfway down, raise the Print Head Lock Lever and remove the Print head, and then reinstall the Print Head. Paper Guide Loading Paper in the Front Tray a Load the paper into the Front Tray with the print side facing DOWN and the leading edge to the far side. b Align the right edge of the paper stack against the inner face of the Front Tray. c Align the near and left edges of the paper stack with the Paper Size Mark. d Pinch the Paper Guide and slide it until it lightly touches the left side of the loaded paper stack. Important If the Paper Guide is pressed too firmly against the side of the loaded paper, the paper may bend and not feed properly. d Make sure the ink lamp lights red. Install all ink tanks in order from right to left according to the colored label. d Insert the Print Head. d When the Authenticate screen appears, enter your c Insert the Setup CD-ROM. The setup program should run automatically. In Windows Vista, go to Step d. In Windows XP and Windows 2000, go to Step f. k When the User Registration screen appears, click Next. Note To register later, click Cancel and go to Step l. After software installation is complete, double-click on the desktop . administrator name and password. If you do not know your administrator name or password, click , then follow the on-screen instructions. The printer driver, On-screen Manuals, and application software are installed automatically. Software installation is now complete. e When the main menu appears, click Easy Install. d If the AutoPlay screen appears, click Run Msetup4. exe. Follow on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the printer. e If the User Account Control screen appears, click Continue. If the same screen reappears in subsequent steps, click Continue. Serial Number l When the PIXMA Extended Survey Program screen Note If you want to select particular items to install, click Custom Install and follow the onscreen instructions to proceed the installation. appears, confirm the message. We would appreciate it if you would take part in this program regarding the use of Canon printers. appears, click Exit. f When the list of applications to install appears, confirm the contents, then click Install. Note Move the cursor over items to display explanations of each application. f When the main menu appears, click Easy Install. The printer driver, On-screen Manuals, and application software are installed automatically. m When the Installation completed successfully screen If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart. Remove the CD-ROM after clicking Restart and restarting the computer. Note · If straight lines are misaligned or print quality is not satisfactory after installing the printer driver, you may need to align the Print Head. [. . . ] appears, click Exit. f When the list of applications to install appears, confirm the contents, then click Install. Note Move the cursor over items to display explanations of each application. f When the main menu appears, click Easy Install. The printer driver, On-screen Manuals, and application software are installed automatically. m When the Installation completed successfully screen If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart. Remove the CD-ROM after clicking Restart and restarting the computer. Note · If straight lines are misaligned or print quality is not satisfactory after installing the printer driver, you may need to align the Print Head. Refer to "Aligning the Print Head" in the Quick Start Guide. · Keep the CD-ROM in a safe place in case you need to reinstall the software. g Read the License Agreement carefully and click Yes. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CANON PIXMA MG3120




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CANON PIXMA MG3120 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.