User manual CANON RAD DSC 2H2010 BROCHURE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CANON RAD DSC 2H2010. We hope that this CANON RAD DSC 2H2010 user guide will be useful to you.


CANON RAD DSC 2H2010 BROCHURE: Download the complete user guide (3888 Ko)

Manual abstract: user guide CANON RAD DSC 2H2010BROCHURE

Detailed instructions for use are in the User's Guide.

[. . . ] For Users in the UK When replacing the fuse only a correctly rated approved type should be used and be sure to re-fit the fuse cover. CHANGING THE FUSE THE MAINS LEAD ON THIS PRODUCT IS FITTED WITH A NON-REWIREABLE (MOULDED) PLUG, INCORPORATING A 3 AMP FUSE. SHOULD THE FUSE NEED TO BE REPLACED AN ASTA OR BSI APPROVED BS1362 FUSE OF THE SAME RATING MUST BE USED. CHANGING THE PLUG IF THE FITTED PLUG IS NOT SUITABLE FOR YOUR SOCKET OUTLETS, IT SHOULD BE CUT OFF AND AN APPROPRIATE PLUG FITTED IN ITS PLACE. [. . . ] The digital signals can be output to the other equipment with a DV terminal. The camcorder's DV terminal works exclusively as an output terminal. · There may be cases where analog-digital conversion cannot be done properly, depending on the signals output from the connected equipment. For example: Signals that include the copyright protective signal, or anomalous signals such as ones that include ghost signals, etc. Even if the AV/headphone terminal is set to "PHONES" through the menu, it will automatically be set to "AV", and "PHONES" will disappear from the display. · You are recommended to use power from a household power socket with the power adapter. · Turn off the power of all equipment before performing connections. · Refer also to the instruction manuals of the other equipment connected. : Signal flow OUTPUT E S-150 S-Video Cable S(S1)-VIDEO Editing VIDEO AUDIO AV IN/OUT MIC STV-250N Stereo Video Cable L R IN/ OUT Side with arrow CV-150F DV Cable Above illustration shows the connection using a S-video cable. You can also connect to the VIDEO terminal instead ( 36). 95 E Turning the Analog-Digital Converter On TAPE + PLAY (VCR) VCR SET UP AV DV OUT···OFF ( 38) To turn the analog-digital converter on, open the menu and select VCR SET UP. OR Press the AV \ DV button on the wireless controller. Caution: · For normal use, set AV \ DV OUT to OFF (so that AV \ DV does not appear in the display). If it is set to ON, you cannot input digital signals through the camcorder's DV terminal. Make absolutely sure to set the audio mode of the new tape to 12-bit and the recording mode to SP. To connect other audio devices: : Signal flow OUTPUT AV IN/OUT STV-250N Stereo Video Cable AUDIO L R An audio device (i. · The AV terminal doesn't put out any video, so connect the S-video terminals and check your TV, or check the LCD or the viewfinder as you add new sound. To connect an external microphone: 100 Editing Notes: · When you add sound using the built-in microphone make sure not to connect any cables to the MIC terminal. · To use your TV to monitor video, connect the S-video terminal ( 35) or the AV terminal (use only the video plug) to your TV. You can monitor the sound with headphones only when using the S-video terminal ( 33). E Preparations Turn the camcorder's POWER switch to PLAY (VCR) and move the camcorder's TAPE/CARD switch to TAPE. · Make sure the REC/SAVE tab on the cassette has been slid to REC (closed position). Dubbing REC PAUSE ZERO SET MEMORY / / REW ­/ PLAY STOP SLOW MENU FF +/ ×2 SET Do not connect/disconnect any cables to/from the camcorder when dubbing audio or preparing to dub audio. TAPE + PLAY (VCR) VCR SET UP ( 38) 1. Locate the point where you wish to start audio dubbing, then press the PAUSE button. · You can use the playback buttons on the body of the camcorder or the special playback functions on the wireless controller in the same way as in playback mode. · The camcorder becomes set to playback pause mode. CA M (V CR) E RA O FF PL A Y AUDIO DUB. PAUSE AV INSERT AV DV Editing AUDIO DUB. ··AUDIO IN 101 5. Press the PAUSE button (and start play on the other audio device if AUDIO IN). · Audio dubbing starts. [. . . ] The printer is printing the data from a memory card inserted into the computer or printer. The printer automatically starts printing the images from the camcorder after completing the current printing. If you select [Continue] in the error screen, you can restart printing. You can restart printing by pressing the RESUME/CANCEL button on the BJ Printer. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CANON RAD DSC 2H2010




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CANON RAD DSC 2H2010 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.