User manual COBY CX-CD425 Operation Manual

[. . . ] Positioning the unit * A minimum distance of 6 INCHES must be maintained to provide sufficient ventilation. * Allow adequate ventilation for the unit ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table cloths, curtains etc. Donot stand it on a thick pile carpet, or install it in a place with poor air flow. * Do not use the unit in excessively hot, cold, dusty, damp or humid place. [. . . ] 11. VOLUME + : Volume up 12. VOLUME - : Volume down 13. FUNCTION : Press to select CD/Tuner/Tape mode. 14. REPEAT/PRESET : CD - Repeat play or TUNER - To select Preset station 15. INTRO : CD Intro play 16. TIMER : Press to switch Timer function on or off. 19. Battery Compartment. 1 2 POW ER 13 EQ MUTE FUN CTION REPEAT M-UP 3 1 4 5 9 2 6 10 3 7 10+ INTRO 14 4 8 19 15 16 MEMORY R ANDOM 5 6 7 8 9 10 11 12 DI SPLAY SLEEP TIMER SKI P SEARC H / STOP/ BAN D PLAY/ PAUSE 17 18 + - VOLUME 8 GENERAL OPERATION POWER ON When power is connected for the first time, or if the power cord was unplugged and reconnected: - The STANDBY LED lights, and the LCD panel appears Clock Time as follows : - Press the MEMORY button ONCE. The Hour segments flash continuously - Press the Skip/Search >> or << button to select the desired hour. The STANDBY LED turns off and the unit defaults to the FM band of tuner mode. Afterward, when the POWER is turned on, the previously chosen function will be selected. - Press the Skip/Search >> or << button to select the desired minute. SETTING THE CLOCK - At Standby mode (Power Off), press the MEMORY button for some seconds will access the time format change mode. - At Normal (Standby Off) mode (Power On), press DISPLAY to display the clock time, then press the MEMORY button for some seconds will access the time format change mode. - The actual time format will be shown in the display '12 H' or '24 H' flash continuously. - Press the Skip/Search >> or << button to change the 12h or 24h format. - All the time information is shown in either 12h ro 24h format. - In case of a 12-hour clock , watch the AM/PM indication. 9 GENERAL OPERATION (CONT. ) TIMER OPERATION To set the wake-up timer - Press the POWER button to turn the unit off STANDBY - Press DISPLAY button. - Press the Skip/Search >> or << button to select the wake-up hour. - Press the Skip/Search >> or << button to select te wake-up minute. Fast Forward Button - Press to start rapid tape Fast winding in forward direction. Fast Rewind Button - Press the to start rapid tape Fast winding in reverse direction. Auto Stop When the tape reaches the end in play or record, the built-in Auto Stop system releases the depressed play, record buttons. When the Auto Stop system operates while recording from the built-in radio or CD Player, only the cassette function is brought automatically to a stop and the radio or CD Player will continue to play. Recording from Radio to Tape - Press the TUNER button to select tuner mode, and press the STOP/BAND button to select the desired band. - To start recording, press the Record button and the Play button of deck at the same time to start recording - To stop recording, press the Stop/Eject Button. - Insert your cassette suitable for recording, press Pause button then press the Record button and the Play button of deck at the same time. - Activate the CD player, and then press (to release) Pause button to start recording. [. . . ] (Auto Scan) To store favourite stations in memory You can store up to 10 stations for FM and 10 station for AM randomly in memory. For example : To store a particular radio station on preset CH19, you can press the PRESET / REPEAT button 19 times. The MEMORY indicator will be disap - Repeat steps 3 and 4 to store additional radio stations in memory. Antenna CAUTION This product uses a laser. Use of controls, adjustments or procedures not listed in this guide may result in hazardous exposure. [. . . ]