User manual COBY CX-CD470 Instruction Manual

[. . . ] CXCD470 MINI SYSTEM WITH 3-CD CHANGERS AND DOUBLE CASSETTE RECORDER INSTRUCTION MANUAL WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. IMPORTANT Since the CD circuity may cause interference to other radio tuners nearby, switch this unit off when not in use or move it away from the affected radio tuner. RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. DANGER LASER SAFETY This unit employs an optical laser beam system in the CD mechanism, designed with built -in safeguards. [. . . ] STOP FUNCTION Press STOP Button [37] to stop playing or cleared of tracks stored. REPEAT FUNCTION REPEAT is a toggle command: No repeat Repeat one track Repeat all No repeat Press the REPEAT Button once: Repeat one track; twice: Repeat all tracks; Three times: Normal SKIP FUNCTION Press FORWARD SKIP Button [35] to select the next track in the sequence. Press BACKWARD SKIP Button [35] to select the previous track in the sequence. SEARCH FUNCTION Press and hold the FORWARD SKIP [35] or BACKWARD SKIP Button [35] to locate a particular point in a track during playing by monitoring the high-speed cueing sound. NOTE: Release the button when you reach the point in the selection that you want. INTRO CHECK FUNCTION Press INTRO CHECK Button, the first 10 seconds of all (programmed) tracks are played in turn. When the end of a disc's playlist is reached, the system will attempt to scan tracks on the next disc in the carousel. When all discs have been scanned the system will enter STOP mode automatically. PROGRAM FUNCTION This function allows you to play the track (up to 20 tracks) of all disc in any carousel. Button [31] when the disc is not turning in stop mode, the MEMORY icon flashes on the display. Press Disc SELECTOR Button [34] or DISC 1, 2, 3 to selected disc which disc you want. Press the FORWARD SKIP or BACKWARD SKIP Button [35] to select the desired track. Repeat steps 2, 3 and 4 to enter desired tracks up to maximum of 20 selections. To clear the program memory, press the STOP Button [37] while the system is in stop mode. DISC SELECTOR FUNCTION Press DISC SELECTOR Button [39], the carousel will rotate to the Forward location. OPEN/CLOSE FUNCTION Press the OPEN/CLOSE Button [38] to drive the disc tray [42] inwards or outwards. If the disc tray [42] is closed or closing then the current system mode. Press the STOP/EJECT Button [20]/[25] and insert a prerecorded cassette tape into the cassette compartment. Also, playback will stop automatically when the end of the tape has been reached. Press the FAST FORWARD Button [19]/[24] to advance the tape or press the REW Button [18]/[23] to rewind. Press the STOP/EJECT Button [20]/[25] when the desired location has been reached. NOTE: In FAST FORWARD and FAST REWIND mode, the tape will not automatically stop when it reaches the end. [. . . ] Timer Pre-EQ Mute - STOP Button Band Select Disc (1, 2, 3) Dn/R-Skip It has the same function as the STOP Button Play/Pause Up/F-Skip [37] on the main unit. 13 - MODE/REMAIN Button · In radio operation Press the button to change from frequency display to clock display and press again to return. · In CD operation Press the button to change the display from playing time to remaining time, and then to clock display. - PLAY/PAUSE Button It has the same function as the PLAY/PAUSE Button [36] on the main unit. [. . . ]