User manual COBY CX-R122

[. . . ] When the EXTRA menu appears, the "CLOSED CAPTION" will be highlighted. Press the DOWN arrow once and then press OK to set the P. LOCK options. [. . . ] You will be prompted to enter a password (the default password is "1234"). To remove all ratings, simply select each individual rating, press OK, and then select "NONE" using the RIGHT arrow. Press the LCD SETUP button to exit. ISSUE #2 CONNECTION USING THE COAXIAL CABLE "WITHOUT" A CABLE RECEIVER BOX If you do not have a cable box: 1) Connect your ANTENNA cable to the "Antenna In" jack located on the back of the TV. 2) Press the MODE button on the remote control until you are in "TV" mode (you should see a channel labeled AIR or CABLE). 3) Press the LCD SETUP button on the remote control (image menu should appear). 4) Press the DOWN directional button until you see "CHANNEL" and then press "OK " on the remote control. 2) Connect a Red & white cable into the "AUDIO IN" located on the side of the TV. 3) Press the MODE button on the remote control until you are in the "COMPONENT" mode. ISSUE #6 CONNECTION USING THE "S-VIDEO" CABLE If you are using the S-Video: 1) Connect the S-Video cable into the " S-VIDEO" located on the side of the TV. 2) Connect a Red & white cable into the "AUDIO IN" located on the side of the TV. 3) Press the MODE button on the remote control until you are in the "S-VIDEO" mode. 4) Done ISSUE #7 CONNECTION USING THE "VGA" CABLE If you are using the VGA cable: 1) Connect the VGA cable into the " VGA IN" located on the bottom of the TV. 2) Connect a Red & white cable into the "AUDIO IN" located on the side of the TV. [. . . ] 4) Done ISSUE #7 CONNECTION USING THE "VGA" CABLE If you are using the VGA cable: 1) Connect the VGA cable into the " VGA IN" located on the bottom of the TV. 2) Connect a Red & white cable into the "AUDIO IN" located on the side of the TV. [. . . ]