User manual COBY DVD-627 Release Note

[. . . ] COBY DVD627 IMPORTANT PLEASE READ! COMMON TROUBLESHOOTING ISSUES ISSUE #1 NO PICTURE Make sure your TV is turned to the correct Video line (AV Input/Video Input 1, 2, 3. etc). [. . . ] NTSC is for the United States TV system. ISSUE #3 NO SOUND Make sure the Red and White wire is connected into the FL & FR. Make sure the Red and White wire is connected into your TV "AUDIO IN". ISSUE #4 PICTURE FADES DARK TO LIGHT You cannot connect the DVD through your VCR, TV/VCR combo, Cable or Satellite. If you cannot connect directly to the TV via a yellow video input, then you will need to purchase an RF Modulator and a four-foot coaxial wire at your local electronics store. ISSUE #5 WHY CANT I GET THE MICROPHONE TO WORK 1) Connect the Microphone into Mic1or MIC2 (located in front of the DVD player) 2) Adjust the MIC and Volume knob to "MAX" (located in front of the DVD player) 3) Turn the microphone switch to the "ON" position (switch located on the microphone) 4) Done. ISSUE #6 HAD PICTURE, NOW RECEIVING A BLACK OR BLUE SCREEN The DVD player may be set to Progressive Scan Mode. Point the remote control directly at the DVD player, and then press the PSCAN/NORMAL button (2-3 times) until the COBY logo appears on your TV screen. If you are still encountering problems with the DVD player, reset the unit back to the default setting. RESET THE DVD PLAYER BACK TO THE DEFAULT SETTING Make sure you do not have a disk in the tray. Using the DVD player remote control: 1) Press the "Setup" button. [. . . ] You can also reach us online at customerservice@cobyusa. com or techsupport@cobyusa. com 1-800-681-2629 OR 718-416-3197 [. . . ]