User manual DAXTEN LONGVIEW 1000

[. . . ] 60950, IEC 60950, FCC 15 Class A, UL 60950 third edition, VCCI Class A iii TABL E OF CONTEN TS Chapter 1: Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Compatibility with Peripherals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Plug your keyboard, monitor and mouse cables into the appropriate ports on the back of the LongView 1000R receiver. Insert one end of a UTP cable into the LINK port on the rear of the LongView 1000R receiver. Route the UTP cable to the AMIQDM module at the remote server, up to 1000 feet (300 meters) away and connect them together. AMIQDM Module LongView 1000R Receiver USB Port Serial Port External Power Supply Local Peripherals Figure 2. 1: LongView 1000R Receiver and AMIQDM Module Installation Chapter 2: Installation 5 To connect the AMIQDM module: 1. Connect the AMIQDM module keyboard, monitor and mouse connectors to the appropriate ports on the back of the server. Connect the AMIQDM module serial and audio connectors into the appropriately labeled ports on the back of the server, if desired. Power up the server. Keyboard, Mouse Video Serial Mic Audio Figure 2. 2: PS/2 AMIQDM Module 6 LongView 1000 Installer/User Guide Connecting power The LongView 1000R receiver features an external power supply with a 4-pin miniDIN connector. A DC port is located on the rear of the LongView 1000R receiver. NOTE: Use only an Avocent-supplied power supply. To connect power to the LongView 1000R receiver: 1. Plug the external power supply's 4-pin miniDIN connector into the DC port on the LongView 1000R receiver. Plug the IEC power cord into an appropriate wall outlet. 7 CHA PTER 3 Operations About Your LongView 1000 Extender While the default settings on your LongView 1000 extender will work with most systems, you may choose to change settings to better fit your extender system. Internal settings such as keyboard layout, emulation and hotkey sequences can be configured via the On-Screen Display (OSD), while Flash upgrades are available via the bootloader function. The OSD also displays your system settings and information about your connected transmitter. NOTE: Table 3. 1 lists available hotkey options to access the OSD. Figure 3. 1: Configuration Screen 8 LongView 1000 Installer/User Guide Configuring keyboard layout and emulation for the receiver via the OSD To change your keyboard layout and/or emulation: 1. If you are activating the OSD for the first time, any of the sequences in Table 3. 1 will activate the display. Ensure the Config tab is selected. Table 3. 1: OSD Hotkey Sequences Hotkey Sequences (all sequences are default until selected) Print Screen Ctrl - Ctrl ( L - R) Ctrl - Ctrl ( L) Ctrl - Ctrl ( R) Alt - Alt (L - R) Scroll - Scroll Alt - Alt (L) Alt - Alt (R) Shift - Shift (L - R) Shift - Shift (L) Shift - Shift (R) 2. 5. Click the Local radio button to change keyboard settings for the LongView 1000R receiver. Use the Layout drop-down menu to scroll to and select your desired country. Select the type of keyboard you are using from the Emulation drop-down menu. The LongView 1000R receiver supports standard, Chyron Duet and Pinnacle FAK keyboard emulation. Click Apply to save settings, or click Close to exit without saving changes. Configuring keyboard layout and emulation for the transmitter via the OSD To change your keyboard layout and/or emulation: 1. Click the Remote radio button to change settings for the remote transmitter. The terminal should be set to 57600 baud, 8 data bits, no parity, 1 stop bit and no flow control. 12 LongView 1000 Installer/User Guide Figure 3. 5: Com1 Properties Activating bootloader To activate bootloader: 1. Click the Call button. The screen closes and the LongView 1000R receiver bootloader OSD is displayed. The terminal menu is now available on the serial port. Chapter 3: Operations 13 Figure 3. 6: Bootloader Menu: No Connected Device Figure 3. 7: Active Bootloader Menu Bootloader features You can select several bootloader options using the terminal menu keyboard. [. . . ] Match the connector color codes (green is mouse and purple is keyboard). Ensure that the mouse and keyboard cables from the AMIQDM module are connected to the correct PS/2 or USB ports on the server. Match the connector color codes (green is mouse and purple is keyboard). Retest the mouse and keyboard by connecting them directly to the server and rebooting. [. . . ]