User manual DAXTEN SCOUTCOMBO 8 BROCHURE

[. . . ] Revision 1. 0 8 Port 8 sets: HD 15 pin Female USB & PS/2 signals combined 1 set: HD 15 pin Female 1 set: PS/2 6 pin mini DIN 1 set: USB A-type* 1 set: PS/2 6 pin mini DIN 1 set: USB A-type* 16 Port 16 sets: HD 15 pin Female USB & PS/2 signals combined 1 set: HD 15 pin Female 1 set: PS/2 6 pin mini DIN 1 set: USB A-type* 1 set: PS/2 6 pin mini DIN 1 set: USB A-type* SCOUTcombo Introduction Thank you for purchasing the SCOUTcombo Switch. This product will ensure easy and accurate control over 8 to 16 Servers through a single console. The SCOUTcombo supports high resolutions of up to 2048 x 1536 without any deterioration of the image quality. Switching between PCs can be accomplished in three ways: through keyboard Hot Key commands, the On Screen Display (OSD) or by using the convenient front panel PC selection buttons. Product Features Allows a user to control 8 ­ 16 computers from one console. [. . . ] F5: Security: security function and user priority setting F6: Lock Port: PC port lock function (administrator only) F1: - Setup Mode. Use the up / down arrow keys to move through the menu, and the left / right arrow keys to make changes. Scan Mode: Select - Scan through selected channels "S" as indicated on the main OSD menu in Status column. Position: Menu - Allows you to set the position of the OSD menu, by using the arrow keys. Banner - Allows you to set the position of the channel banner, by using the arrow keys. Choices are Scroll Lock , Caps Lock or Ctrl Note: Hot Keys can also be changed by the use of hot key command K. e. g. : If the hot key is set to Scroll Lock, then Scroll Lock Scroll Lock K make Caps Lock or Ctrl the hot key. Enter will Sound: Enable (ON) or disables (OFF) the internal buzzer. Choices are: English (En), Deutsch (De) or Francais (Fr). F3: - Logout / Console Lock When the console is in locked mode, the push buttons and the console will lock. This will only accept the correct password. Note: If you forget your password, then there is no way in which to disable the security and the switch will need to be returned to Daxten. F4: - Rename. Allows you to rename the PC / Server name shown on the OSD menu and channel banner. F5: - Security Mode Entering the correct password enables the security function. Note: The Default settings are User Name: admin Password: 123456 After setting the security mode to ON, this automatically enables the Lock Mode (F3), and also allows the use of the Hot Key H command. Users will have access to servers for which they have rights to access. Security Setup User Authorisation Setting F6: - Lock Port This blocks all access to the locked server. An "L" with be displayed in the Status column of the OSD menu. The port can be unlocked by selecting F6 from the OSD menu and keying in the password. Port Lock Channel Banner (Single Switch) 1. PC name (Channel) SUN Combo keys The SCOUTcombo can emulate some of the special SUN keys to perform special functions in the SUN Operating System environment. So when the SCOUTcombo is connected to a SUN computer, the switch emulates these SUN keys using a set of key combinations called Combo keys. SUN key Stop Props Front Open Find Again Undo Copy Paste Cut Combo key Left key Left Alt Left key Left Ctrl Left key F1 Left key F2 Left key F3 Left key F4 Left key F5 Left key F6 Left key F7 Left key F8 SUN key Help Compose Mute Volume Down Volume Up Power Combo key Left key F11 Left key Left Shift Left key 1 Left key 2 Left key 3 Left key F12 Reset Switch Press the reset switch to perform a system reset. This switch must be pushed with a thin object, for example, the end of a paper clip, or a ball point pen. Cascading the SCOUTcombo The SCOUTcombo can be cascaded up to three levels, enabling control of a maximum of 4096 servers. Cascaded units dont require any special configuration. Setting up a cascaded installation: Ensure all the switches being connected together are powered off. Use a USB & PS/2 Cable Set to connect the slave units of the maser switch. The master and slave switches will automatically configure themselves. Selecting a cascaded port. There a two methods for selecting a cascaded port:1. Use the OSD menu and selecting the channel for the slave switch and then the second slave switch or the server. [. . . ] If non-Daxten approved power supply or cabling is attached to the product. If defect or malfunction was caused by abuse, mishandling, unauthorized repair, or use other than intended. If damages were due to or caused by equipment or software not provided by Daxten. If the product is used with non-grounded or incorrectly polarized AC power. [. . . ]