User manual DAXTEN SCOUTUSB

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DAXTEN SCOUTUSB. We hope that this DAXTEN SCOUTUSB user guide will be useful to you.


DAXTEN SCOUTUSB : Download the complete user guide (586 Ko)

You may also download the following manuals related to this product:

   DAXTEN SCOUTUSB (597 ko)
   DAXTEN SCOUTUSB BROCHURE (51 ko)
   DAXTEN SCOUTUSB BROCHURE (101 ko)

Manual abstract: user guide DAXTEN SCOUTUSB

Detailed instructions for use are in the User's Guide.

[. . . ] This product will ensure easy and accurate control over 2 - 4 PCs through a single console. The SCOUTusb supports high resolutions of up to 2048 x 1536 without any deterioration of the image quality. Switching between PCs can be accomplished in two ways: through keyboard Hot Key commands or by using the convenient front panel PC selection buttons. Product Features Allows a user to control 2 - 4 computers from one console. [. . . ] Connect your microphones audio jack to the SCOUTusb's Microphone Console port on the rear panel. Connect the HD 15-pin male connector to the next free PC port on the rear panel of the SCOUTusb (labelled PC1, PC2. . . ). Connect the blue HD 15-pin male connector to the VGA port on your computer. Connect the pink audio jack to the microphone port on your computer. 2. 3. Power up the first computer, and then verify keyboard and mouse functionality. If you find that the keyboard or mouse is not working correctly please verify that all cables are properly connected, and that the HID drivers are loaded on the computer. Rear Panel Layout 4-Port switch Using the SCOUTusb The SCOUTusb provides two methods to select the desired computer. You may use either the Select button on the unit, or make use of the keyboard Hot Key commands. You may notice that the mouse cannot be used for around 2 seconds when the SCOUTusb switches to another computer. This is normal and is caused by the synchronization process which ensures that the mouse operates correctly. Selection buttons 2 Port: Pressing the Select button on the front panel cycles through computers 1 ~ 2. 4 Port: Pressing the individual PC buttons will switch the signal to the desired computer. Keyboard Hot Key commands To send Hot Key commands to the SCOUTusb switch, press and release Ctrl Ctrl within 2 seconds. The following commands are supported: First Key Ctrl Ctrl Ctrl Ctrl Ctrl Ctrl Ctrl Second Key Ctrl Ctrl Ctrl Ctrl Ctrl Ctrl Ctrl Command Key C 1 , C 2 , C 3 or C 4 H 1 , H 2 , H 3 or H 4 A 1 , A 2 , A 3 or A 4 S 0 Command Result Switches to the desired PC Switches the hub to the desired PC Switches all to the desired PC Switch to previous PC Switch to next PC Toggle Sound ON / OFF Toggle Auto-Scan mode ON / OFF Note: Directly select Channel or Hub. For example, if you press: Ctrl Ctrl C 2, means the Channel on the port 2 not the Hub Ctrl Ctrl H 2, means the Hub on the port 2 not the Channel Ctrl Ctrl A 2, means all, Channel and Hub In Auto-Scan mode, the image shown on the monitor will automatically switch to the next computer. After the last computer has been shown, the first computer will be shown again. To change from the factory default of Ctrl please use the following sequence: [OLD HOT KEY] [NEW HOT KEY] for example: Ctrl Ctrl Scroll Lock Scroll Lock New Hot Key: Scroll Lock Scroll Lock The following combinations are available for Hot Keys: Ctrl Ctrl (default) Alt Alt Scroll Lock Scroll Lock Ctrl, Shift Shift Built-in 2-Port Hub Attaching any USB device to the 2-Port hub, that device will be automatically switched as you Switch PCs. Service Information Technical Support If you cannot determine the nature of a problem, please call Daxten and ask for Technical Support. If possible, call from a phone located near the unit, as we may be able to solve your problem directly over the phone. If we cannot solve your problem, and determine that the fault is in the unit, we will issue a Return Material Authorisation (RMA) number that must appear on the outside of all returned products. The unit should be double-packed in the original container, insured, and shipped to the address given to you by our Technical Support representative. The Technical Support offices are found on the back of this manual. Limited Warranty Daxten warrants to the end user that this product is and will be free from defects in materials and workmanship for a period of 24 months from the date of purchase. If during the warranty period the product should fail, the purchaser must promptly call Daxten for a RETURN MATERIALS AUTHORIZATION (RMA) number. [. . . ] For information on how to recycle this product, please check with the reseller of the product that replaces this product "Take Back" or the original seller of this product. www. daxten. com Ireland Bay 21 Free Zone West Shannon, Co. Clare info. ie@daxten. com www. daxten. ie Tel: +353 (0) 61 23 4000 Fax: +353 (0) 61 23 4099 USA 811 W. Evergreen Ave Suite 302A Chicago, IL 60622 info. us@daxten. com www. daxten. us Tel: +1 312 475 0795 Fax: +1 312 475 0797 United Kingdom 5 Manhattan Business Park Westgate London W5 1UP info. uk@daxten. com www. daxten. co. uk Tel: +44 (0) 20 8991 6200 Fax: +44 (0) 20 8991 6299 · Österreich Künstlergasse 11/4 A-1150 Wien info. at@daxten. com www. daxten. at Tel: +43 (0)1 879 77 65 Fax: +43 (0)1 879 77 65 30 · Deutschland Salzufer 16, Geb. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE DAXTEN SCOUTUSB




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DAXTEN SCOUTUSB will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.