User manual DOMO DO324A

[. . . ] During this period the manufacturer is responsible for any failures which are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions or repairs executed by a third party. 5 DO-324A RECYCLING INFORMATION The symbol on the product or on its packaging indicates that this product may not be treated as household waste. [. . . ] FAN function Press the “mode” touch until the fan indication light will turn on. AUTO function When the airco is in the “auto” mode, the airco will automatically make a selection between “cool” or “fan” function, depending on the room temperature and the selected temperature. The airco will automatically stabelise the room temperature on the selected temperature. When using the “auto” function, you can’t select the fan speed. TIMER function When the unit is on, you press the “timer” touch. This indicates that the “auto shut off” is activated. When pressing het “timer” touch again, the “timer on” indication light will turn on. This indicates that the “auto on” function is activated. After finishing the selection, the time will start to countdown on the display until “auto on” or “auto off”, depending on the selection you made. You can cancel the timer function at any time by pressing the “on/off” touch. When the error code E1 or E2 is displayed, the timer selection will be canceled. SLEEP function When pressing the “sleep” touch, the selected temperature will be elevated with 1 °C after 30 min. After another 30 min the temperature will increase with another 1°C. After this time, the airco will go back to the original set temperature and the “sleep” function will end. NOTE : this function can not be selected with the “fan” or “dry” function. AUTOMATIC RESTART When the airco will turn off unexpectely, because of a power failure, the unit will turn back on when the power comes back on. So if the power failure is shorter than 3 min the unit will still take up to 3 min to restart. INSTALLATION Place the airco on a solid and stable floor, this way you will prevent excessive noice and vibrations. Make sure that the floor is strong enough to support the weight of the appliance. 60 DO-324A INSTALLATION OF THE WINDOW KIT The air outlet hose must be used in the “cool” or “auto” mode. During the “fan” or “dry” mode, you don’t need to attache the air outlet hose. - Use the window seal to close up any gaps between the window and the window kit. [. . . ] When pressing this button, nothing can be changed on the current setting. Press the “lock”button again if you want to cancel the lock. When the “lock” function is set, a small key symbol will be shown on the display. LCD DISPLAY This button will clear the display on the airco unit and will turn on the light of the display. [. . . ]