User manual ELECTROLUX 5 SAFETY & EDB 8050,MV

[. . . ] Never leave the appliance unattended while connected to the supply mains. The appliance must be switched off and the mains plug withdrawn each time after use, before cleaning and maintenance. The plug must be removed from the socket outlet before the water reservoir is filled with water. [. . . ] The plug must be removed from the socket outlet before the water reservoir is filled with water. The mains cable must not come into contact with any hot parts of the appliance. Do not exceed the maximum filling volume as indicated on the appliances. If there are limitations please define water quality / type of water that can be used with appliance. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use. Iron on wrong side or use ironing cloth to prevent shine marks, especially with dark colours. F Varied ironing speed and fabric dampness might cause optimal setting to differ from that recommended in the table!Turn the steam knob to select the desired steam output for each garment, if selecting the off position, it indicates ironing without steam, the iron can be used as a dry-iron. 11 13:33 Troubleshooting Fehlersuche GB D F NL GB Problem Soleplate is not heating even though iron is turned on. Put iron on horizontal position and wait before using steam jet function. Put iron in vertical position and wait until temperature indicator light turns off. Put the iron on its heel and wait until the light has gone out before you start ironing. Empty the water tank and set the steam control to position off before storing the iron. S DK FI N Flakes and impurities come out of the soleplate during ironing. Water leaks from the soleplate while the iron is cooling down or after it has been stored. You have used hard water, which has caused scale flakes to develop in the water tank. [. . . ] Water leaks from the soleplate while the iron is cooling down or after it has been stored. You have used hard water, which has caused scale flakes to develop in the water tank. The iron has been put in horizontal position while there is still water in the water tank. [. . . ]