User manual EPSON LABELWORKS LW-300

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual EPSON LABELWORKS LW-300. We hope that this EPSON LABELWORKS LW-300 user guide will be useful to you.


EPSON LABELWORKS LW-300 : Download the complete user guide (576 Ko)

You may also download the following manuals related to this product:

   EPSON LABELWORKS LW-300 (580 ko)
   EPSON LABELWORKS LW-300 SYMBOL LIST (810 ko)
   EPSON LABELWORKS LW-300 SYMBOL LIST (810 ko)
   EPSON LABELWORKS LW-300 SYMBOL LIST (810 ko)
   EPSON LABELWORKS LW-300 SYMBOL LIST (810 ko)
   EPSON LABELWORKS LW-300 SYMBOL LIST (810 ko)
   EPSON LABELWORKS LW-300 SYMBOL LIST (810 ko)
   EPSON LABELWORKS LW-300 SYMBOL LIST (810 ko)

Manual abstract: user guide EPSON LABELWORKS LW-300

Detailed instructions for use are in the User's Guide.

[. . . ] c Do not press the "Cut Button" before printing is complete. 1. Display The following are the settings to make operation easier. Contrast Adjusts the density of the fonts on the display. Value: -5 to +5 Language Selects the language of the settings and messages on the display. Language: English/Spanish/French/Portuguese-Br/ Portuguese-EU/ Italian/Dutch/German inch:cm Selects the unit to indicate the length. [. . . ] 2. Attach the label and rub it firmly.  Turn the power off after use. Initialising this product The product may stop functioning due to static electricity or other causes. Initialise the product if it does not operate normally such as the display is interrupted. To abort: Press any button other than . Specifications  Body Approx. 400g (excluding batteries, tape cartridge)  Power supply Type Input Output Total output power APT0615Z1-1 AC100-240V, 0. 3A, 50-60Hz (dedicated adapter, power cable only) DC6. 5V, 1. 5A 10W AAA alkaline battery x 6 Manufacturer Seiko Epson Corp. Dimensions Weight AC adapter CAUTION When handling batteries If liquid leaks from a battery, wipe it off with a cloth and replace it with a new one. If the liquid comes in contact with your skin, wash it away with water immediately. If the batteries are used incorrectly, they may cause leakage, overheating, explosion, erosion, or damage to the product, which may result in fire or injury. • Do not use new ones and old batteries together, or mix different types of batteries. • Take the batteries out immediately when they have no power remaining. • Take the batteries out if you do not use the product for a long time. • Do not pinch the batteries with metal tweezers or use any pointed sharp metal object such as the tip of a mechanical pen or ball-point pen when taking the batteries out. When disposing of used batteries, be sure to follow your local regulations. 1. AC adapter: Disconnect from the outlet and the product.  Usage conditions 10 to 35 degrees C -10 to 55 degrees C Battery  Operating temperature Storage temperature Supported tape width DANGER 6 mm, 9 mm, 12 mm When handling batteries If liquid leaking from an alkaline battery gets into your eyes, do not rub your eyes but immediately wash them well with clean water and contact a doctor. Otherwise, it may cause blindness. Troubleshooting  Messages Insert Tape No tape cartridge is installed. Check battery Possible causes for this message are: • No power remaining or inserted in the wrong way • Mixed with other types or old ones If so, set the batteries correctly or replace them with new ones. If you open the cover on the rear without turning the power off, a message is displayed and then the power is turned off automatically. If the same message appears, turn the power off and contact the EPSON customer support centre. Editing characters Press character keys and enter text. Available marks  Adding a punctuation mark to the label Useful functions This section explains various functions that will help you create labels.  Changing the font size  Adding a frame WARNING When using the AC adapter and power cable Do not use any AC adapter or power cable other than the dedicated AC adapter and power cable. Take the following precautions when handling the AC adapter and power cable. • Make sure the plug is not dusty before inserting it into an outlet. • Do not apply strong shocks to or put a heavy object on the AC adapter or power cable. Otherwise, damage, overheating or smoking may occur, which may result in fire or electric shock. Replace them with new ones, or use the dedicated AC adapter (APT0615Z). 1. [. . . ] The label may not adhere due to the material of the attachment location or the environmental conditions. Notes on usage • Operate the keyboard gently. • Take care not to cut your fingers when cutting the label with scissors. • Do not attach a label on human bodies, living things, public facilities or other people’s belongings. Nothing is printed even though pressed. has been If there is a choice of characters with an accent mark, they are indicated on the display. Characters with an accent mark sSymbol List to the label Creating another piece of text 1. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE EPSON LABELWORKS LW-300




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual EPSON LABELWORKS LW-300 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.