User manual EPSON WORKFORCE PRO WF-8010 DW NETWORK ADMINISTRATOR'S GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual EPSON WORKFORCE PRO WF-8010 DW. We hope that this EPSON WORKFORCE PRO WF-8010 DW user guide will be useful to you.


EPSON WORKFORCE PRO WF-8010 DW NETWORK ADMINISTRATOR'S GUIDE: Download the complete user guide (2043 Ko)

You may also download the following manuals related to this product:

   EPSON WORKFORCE PRO WF-8010 DW NETWORK ADMINISTRATOR'S GUIDE (2101 ko)

Manual abstract: user guide EPSON WORKFORCE PRO WF-8010 DWNETWORK ADMINISTRATOR'S GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] Symbol Warning Caution Explanation This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling. This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling. Explanation of Symbols Symbols Explanation Symbol indicating an action that must not be done Symbol indicating an action that should be done c Symbol indicating related or useful information Safety Precautions for Installation Warning The setting plate is exclusively for mounting the projector on a wall. If anything other than a projector is mounted, the weight may result in damage. [. . . ] € Take care not to trap the cables between the setting plate and wall plate. 30 Installation Guide c Secure the setting plate and the wall plate Secure the supplied M6 screws (x3) with a commercially available No. 3 cross-head screwdriver, and then lightly tighten the supplied M6 bolt (x1) with the spanner. D Adjust the vertical slide with the open-ended spanner, and align it with the standard position ( ) • Tightening the hexagonal axis at the top ( • Tightening the M8 bolt at the bottom ( ) raises the setting plate, and loosening the axis lowers it. 31 Installation Guide e Tighten the M6 bolt (x1) to fix the setting plate in position Securing the projector to the setting plate a Loosen the screws (x2) and remove the cable cover from the projector b Insert the slide plate into the setting plate from the interface side of the projector 32 Installation Guide c Align the 3-axis adjustment unit with the slide plate's standard position ( ( ) indicates the screw holes for the bolts. ) d Tighten the supplied M4 bolts (x2) e Connect the cables to the projector 33 Installation Guide c • Connect the power cord last. € When connecting to the Audio1, Audio2, and Computer1 ports, we recommend connecting cables to the ports in the following order: Audio1, Audio2, and then Computer1. Adjusting the Projected Image Follow the procedures below to adjust the projected image. 41) Adjusting the Projection Position • Do not make adjustments using the projector's Keystone function. € When setting up multiple projectors using the batch setup function, perform this procedure before adjusting the projected image. 66 a Press the [t] button on the remote control or the control panel to turn on the projector Using the Remote Control Using the Control Panel Caution While projecting, do not put your face or hands near the air exhaust vent, and do not place objects that may become warped or damaged by heat near the vent. 40 Installation Guide d Adjust the focus to match the focus in the following figure ( Open the air filter cover, and then adjust the focus. If any of the ( ) areas are out of focus, adjust the focus After you finish making adjustments, close the air filter cover. E Press the [Esc] button on the remote control or the control panel to remove the Test Pattern Calibrating the pen Check that adjusting the projected image is complete before you start calibrating the interactive pen. 34 There are two methods available for calibrating the pen; Auto Calibration and Manual Calibration. When calibrating the pen for the first time after installing the projector, perform Manual Calibration for optimum calibration. For the Auto Calibration method, see the projector's User's Guide (on the Document CD-ROM). A Turn on the projector, and then press the [Menu] button Using the Remote Control Using the Control Panel 41 Installation Guide b Select Easy Interactive Function from Extended c Select Manual Calibration d Check that the screen is in focus, and then select Yes A green dot is displayed at the top left of the projection screen. 42 Installation Guide e Touch the center of the dot with the pen tip button The dot disappears and moves to the next position. 43 Installation Guide f Repeat step 5 until all of the dots disappear The dot appears at the top left first and then moves towards the bottom right. C • Check that there are no obstacles between the interactive pen and the Easy Interactive Function receiver ( ). € If you touch the wrong position, press the [Esc] button on the remote control to return to the previous dot. [. . . ] If you change the PJCONFDATA section of the file name, the projector may not be able to recognize the file correctly. Perform "Remove USB device" on your computer, and then disconnect the USB cable When using OS X, perform "Remove EPSON_PJ". Reflecting saved settings to other projectors a Disconnect the power cord from the projector, and check that all of the projector's indicators have turned off 69 Appendix b c Connect the computer's USB port to the projector's USB-B port with a USB cable While holding down the [Menu] button on the remote control or the control panel, connect the power cord to the projector The status indicator and the power indicator turn blue, and the lamp indicator and the temperature indicator turn orange. When all of the projector's indicators turn on, release the [Menu] button. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE EPSON WORKFORCE PRO WF-8010 DW




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual EPSON WORKFORCE PRO WF-8010 DW will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.