User manual FLORABEST FRWS 9 A1

[. . . ] Use this appliance only as described and only for the specified areas of application. In addition, pass these documents on, together with the product, to any future owner. [. . . ] –º Exercise caution when deburring with the carpet knife. Take care to drill with light pressure only, especially in sheet metal downpipes. Then deburr the drillhole with a suitable tool, such as a carpet knife for plastic downpipes or a file with sheetmetal downpipes. Now drill the hole in the rainwater barrel with the crown drill and then deburr the drillhole (see Figure F). 12 08:47 Rainwater collector NOTICE ► With a downpipe size of 70 mm you will need to cut off the rubber tabs at the indentations with scissors (see Figure G). Select the flange ( or ) appropriate to the size of your downpipe. Take note of the size details indicated on the inside of the flanges. Glue one of the flange gaskets into the recess provided on the inside of the flange. To do this, remove the adhesive backing from the flange gasket (see Figure H). When inserting it, ensure that the guides in the flange grip the rails on the clamping device. [. . . ] –  Remove the control valve and the filter insert from the rainwater collector (see Figure N). –  Remove any accumulated leaves from the filter and rinse the control valve with a water hose (see Figure N). [. . . ]