User manual FLYMO VISIMO VM032

[. . . ] The operator or user is responsible for accidents or hazards occurring to other people or their property. Installed 100% safety cannot be guaranteed and safe working practice must be followed at all times. Before use, examine cable for damage, replace it if there are signs of damage or ageing. [. . . ] Never pick up or carry a product when it is operating or still connected to the mains supply. Remove the plug from the mains : - before leaving the product unattended for any period; - before clearing a blockage; - before checking, cleaning or working on the appliance; - if you hit an object. Do not use your product until you are sure that the entire product is in a safe operating condition. Keep all nuts, bolts and screws tight to be sure the product is in safe working condition. Only use the replacement blade and blade bolt specified for this product. Be careful during adjustment of the product to prevent entrapment of the fingers between moving blades and fixed parts of the machine. To ensure you have a secure connection between the lawnmower and the extension cable we strongly recommend you use the following method of attaching the cable: 1. Plug the short connection lead into the socket of the extension cable. Form a loop in the end of the extension cable near to the socket and secure this in the strain relief feature at the top of the switchbox. The Motor is protected by a Thermal Cut-Out which is activated when the blade becomes jammed or if the motor is overloaded. The Thermal Cut-Out will only reset when the start/stop lever is released. Clear any obstruction and wait for a few minutes for the Thermal Cut-Out to reset before continuing to use the mower. Switch off, wait until the blade has stopped rotating and disconnect from the mains electricity supply BEFORE attempting to remove or refit the blade. To remove the blade bolt, hold the blade firmly with a gloved hand and with a spanner, loosen the blade bolt by turning it anti-clockwise (R). [. . . ] * This guarantee is additional to , and in no way diminishes the customers statutory rights. Failures due to the following are not covered, therefore it is important that you read the instructions contained in this Operator's Manual and understand how to operate and maintain your machine: Failures not covered by guarantee * Failures as a result of not reporting an initial fault. * Failures as a result of not using the product in accordance with the instructions and recommendations contained in this Operator's Manual. [. . . ]