User manual HITACHI POWER TOOLS SB8TA ELECTRIC TOOL PARTS LIST

[. . . ] If your wireless network has a security code, enter the security code, and then select the OK button. In most cases, after you have entered the security code, the refrigerator acquires the Network addresses it needs (IP Address, Subnet Mask, Gateway, and DNS) to connect to the network. If it does not or you need to enter these values manually, go to Step 9. Checklist before Reporting a problem There is no wireless router detected. • Check if the power for the wireless router is on. [. . . ] If it does not or you need to enter these values manually, go to Step 9. Checklist before Reporting a problem There is no wireless router detected. • Check if the power for the wireless router is on. • Check if other devices (Notebook PC, Smart phone etc. ) can access the wireless router. If wireless router is not searched by even other devices, the wireless router is probably the issue. • If the wireless router is located far away from the Fridge, move the wireless router closer to the Fridge and check if it is detected. • Turn the power of both the Wireless router and the Fridge off and on. 1. Touch the Settings button. Can’t remember the password for the wireless router connection. • Refer to the wireless router manual and reset the password. The fridge is not able to connect to the wireless router. Touch the ∨ button in the right bottom corner of the Settings list. Touch the Wi-Fi ON button on the Settings list. NOTE If you can’t remember the name of your wireless network system (SSID) or its security code, please see the user manual of your router. 8. In this case, contact with Internet service provider for assistance in adding additional devices your Internet access. • Turn the power of both the Wireless router and the Fridge off and on. Functions using the wireless network (Wi-FI) do not work. • Functions using the wireless network (Wi-Fi) such as Epicurious, Calendar, Weatherbug, AP News and Twitter can be used only if the refrigerator is connected to your wireless network (Wi-Fi). • If there are any other devices connected to the wireless network, please check the connection status of the devices. • Because these services depend on data downloaded from the internet, the information updates can be delayed or cut depending on the status of the internet connection. • Turn off the power to the Wireless router and the Fridge then back on. 10. After entering the values for all four parameters, touch the Apply button. ▶ : Locked with Security Code, : Signal Strength ▶ Depending on the wireless router type, the refrigerator may not make a connection. We recommend you use a wireless router that supports IEEE 802. 11 b/g/n. [. . . ] After entering the values for all four parameters, touch the Apply button. ▶ : Locked with Security Code, : Signal Strength ▶ Depending on the wireless router type, the refrigerator may not make a connection. We recommend you use a wireless router that supports IEEE 802. 11 b/g/n. [. . . ]