User manual HITACHI POWER TOOLS SOD110 ELECTRIC TOOL PARTS LIST

[. . . ] * The company names and product names in this Owner's Manual are the trademarks or registered trademarks of their respective companies. めてください。 * この取扱説明書に掲載されている会社名および製品名は、それぞれ各社の商標または登録商標です。 * TDIF は、ティアック株式会社の商標です。 –1– PRECAUTIONS WARNING Failure to observe the following warnings may lead to fatality or serious injury from fire or electric shock. € Before installing the card, you must refer to the owner’s manual of the host device or to the Yamaha website (“Guidance on the use of Mini-YGDAI cards” page) to verify that your host device supports this card, and to verify the number of cards that can be installed in combination with other Yamaha or third-party cards. [. . . ] Com/ • If one or more cards in a combination not endorsed by Yamaha are installed in a Yamaha device, electrical shock, fire, or malfunction may occur. Please note that the MY16-AE/AT/TD cannot be used with the following models of Yamaha product that accept option I/O cards (Yamaha MY series and third-party products). Models: 01V, AD824, AW2816, AW4416, D24, DA824, DIO8, DME32, SREV1 • To use the MY16-AE/TD card in a DM2000 or 02R96, the following system software is required: DM2000 Version 1. Do not apply excessive force to board connectors or other board components. (Mishandling of board may lead to shock , fire hazard , or equipment failure. ) • Be sure to disconnect the power cable from the main unit before installing this card (to eliminate shock hazard). CAUTION Failure to observe the following precautions may lead to personal injury, or may result in damage to equipment or other property. € Do not touch the board’s metallic leads (pins) when handling the card. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. * This applies only to products distributed by HITACHI POWER TOOLS CORPORATION OF AMERICA. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. €4– Notice When inserting the card, align both sides of the card with the guide rails in the slot of the host device. Ƴ記 カードを取り付けるときは、取り付ける機器のスロットにあるガイドレールに、カードの両端を確実に合わせてください。 –5– MY16-AE The MY16-AE is a 16-channel digital I/O card that supports the AES/EBU format. MY16-AE は、AES/EBU フォーマットに対応した 16 チャンネルのデジタル I/O カードです。 接続端子のピンアサインは、以下のとおりです。 13 1 Signal Hot Cold Data In Ch Data Out Ch 1-2 3-4 5-6 7-8 1-2 3-4 5-6 7-8 Open 9-10 11-12 13-14 15-16 9-10 11-12 13-14 15-16 1 14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 9, 11 GND 10, 12, 13, 22, 23, 24, 25 25 14 Pin MY16-AT The MY16-AT is a 16-channel digital I/O card that supports the ADAT format. [. . . ] Ƴ記 カードを取り付けるときは、取り付ける機器のスロットにあるガイドレールに、カードの両端を確実に合わせてください。 –5– MY16-AE The MY16-AE is a 16-channel digital I/O card that supports the AES/EBU format. MY16-AE は、AES/EBU フォーマットに対応した 16 チャンネルのデジタル I/O カードです。 接続端子のピンアサインは、以下のとおりです。 13 1 Signal Hot Cold Data In Ch Data Out Ch 1-2 3-4 5-6 7-8 1-2 3-4 5-6 7-8 Open 9-10 11-12 13-14 15-16 9-10 11-12 13-14 15-16 1 14 2 15 3 16 4 17 5 18 6 19 7 20 8 21 9, 11 GND 10, 12, 13, 22, 23, 24, 25 25 14 Pin MY16-AT The MY16-AT is a 16-channel digital I/O card that supports the ADAT format. Before installing it, you must set the configuration switches depending on the device that you intend to connect. [. . . ]