User manual HITACHI POWER TOOLS VTV10 ELECTRIC TOOL PARTS LIST

[. . . ] You can shoot anytime, anywhere without having to worry about power supply. * Continuous recording with the optional NP-FH100 battery (LCD backlight =OFF). It becomes about 200 minutes under the ordinary use with frequent recording start/stop, zooming etc, Remote Monitoring & Control As the control unit has a 2. 7-inch (16:9), 210, 000 pixels LCD panel that uses ClearPhoto LCD plus, the images captured by the camera are at your fingertips to be checked. The control unit is also equipped with a recording button, zoom lever, and manual control dial. With the VTV10 ELECTRIC TOOL PARTS LIST, it is easy to shoot in a way that is impossible with ordinary camcorders. [. . . ] The HDMI and analog video connector outputs SD signals when the recording mode of VTV10 ELECTRIC TOOL PARTS LIST is set in SD. Video switcher or recorder with HD-SDI input HDMI or component output HD-SDI converter HD-SDI When the HDMI signal is converted to HD-SDI, a short delay may occur. Please consult the manufacturer of converter the detail. Shooting Small Animals and Insects The tiny camera of the VTV10 ELECTRIC TOOL PARTS LIST is also good for shooting small animals and insects. The small size of the camera makes it ideal for shooting wild animals, which are very cautious. It is possible to record continuously for about 405 minutes (6 hours 45 minutes)*. You can also shoot the world of insects by sliding the camera through the grass. * Continuous recording with the optional NP-FH100 battery (LCD backlight =OFF). It becomes about 200 minutes under the ordinary use with frequent recording start/stop, zooming etc, Images From Operators’ Sightlines Images taken from the sightlines of operators with special skills, such as process engineers can be used as simulation material or as a training video to help others acquire such skills. Also the recorded video can be used later on to help the user analyze the actions or the action pathways made by a person or object carrying the camera. Notes: > The LCD panel does not display all captured area. > When the camera unit receives a sudden and very strong shock, the internal lens may move, and it may sometimes cause a momentary shift of focus position. The use of shock absorbers are recommended under these certain circumstances. As for the positions and methods of installing the camera and the control unit, users should take good care to confirm safety on their own in advance. Sony cannot take responsibility for any problems arising from the installation of the VTV10 ELECTRIC TOOL PARTS LIST. Devices and Recording Methods Exmor™ CMOS Sensor – Cutting Edge Image Sensor Technology “Exmor” CMOS sensor, which is also used in professional camcorders and high-end D-SLR cameras, is used in the VTV10 ELECTRIC TOOL PARTS LIST. > These ways take actual time for capturing or copying, but after that, you can edit in the same condition using normal HD editing. Memory Stick PRO Duo™ HDMI HDMI VTV10 ELECTRIC TOOL PARTS LIST HDMI or HDMI to HD-SDI Editing on NLE software HD-SDI* converter with HD-SDI or HDMI capture board *The analog component output from VTV10 ELECTRIC TOOL PARTS LIST can also be converted HD-SDI with a commonly-used analog to digital converter. Non-linear Editing Software Supporting AVCHD Native Editing > If you use non-linear editing software that supports AVCHD native editing, you can edit an AVCHD file by transferring it to a computer at high speed. > The load on the computer during AVCHD editing is relatively big, but it is still possible to edit while maintaining quality at the time of shooting without converting to another compression method*. * Parts where effects have been added will be compressed again. SD Editing The VTV10 ELECTRIC TOOL PARTS LIST has a down-conversion function. The down-converted SD signal such as composite or S-video from HD recordings can be captured by a video recorder which has SD input connectors like HVR-M15AU/M25AU/M35U. For Windows Vista: 1 GB or more Hard disk: Disk volume required for installation: Approximately 500 MB (10 GB or more may be necessary when creating AVCHD format discs. 50 GB maximum may be necessary when creating Blu-ray discs. ) Display: Minimum 1, 024 × 768 dots Others: USB port (this must be provided as standard, Hi-Speed USB (USB 2. 0 compatible) is recommended), Blu-ray disc/DVD burner (CD-ROM drive is necessary for installation) Either NTFS or exFAT file system is recommended as the hard disk file system. Attention This camcorder captures high definition footage in the AVCHD format. Using the enclosed PC software, high definition footage can be copied onto DVD media. However, DVD media containing AVCHD footage should not be used with DVD based players or recorders, as the DVD player/ recorder may fail to eject the media and may erase its contents without warning. DVD media containing AVCHD footage may be played on a compatible Blu-ray Disc™ player/recorder or other compatible device. Notes • Operation is not assured on all types of computer environment. >Or by using a commercially available HDMI to HD-SDI converter, a video capture card that supports HD-SDI, and non-linear editing software supporting them, it is possible to capture the HD signals onto the computer for editing*. *The timecode data in the HD-SDI signal is generated by the converter. > The captured images and sound will become a file formatted in accordance with the settings of the non-linear editing software.  Accessories ACC-H1BP: Accessory kit Optimal accessories for shooting with the VTV10 ELECTRIC TOOL PARTS LIST have been assembled into a kit. Contents of the kit •NP-FH70: Rechargeable Battery Pack Compact large-capacity battery that supports extended shooting •AC-VQH10: AC Adapter/ Charger A quick charger that can sequentially charge two rolls of H-series batteries •VCL-HG0730A: Wide Conversion Lens A roughly 0. 7x wide conversion lens •RM-AV2:Remote Commander A remote controller that puts zoom, Rec start/stop at your fingertips. [. . . ] 0. 2 megapixel 16:9(640 x 360) Memory Stick PRO Duo™ / Memory Stick PRO-HG Duo™ (1GB or larger) Component A/V cable -> Pin plug x 3 (480i or 1080i, To use with COMPOSITE output is impossible. Component A/V cable -> Pin plug x 2) A/V connecting cable -> Pin plug x 1 (To use with COMPONENT output is impossible. ) A/V connecting cable -> Pin plug x 2 HDMI OUT USB Port Memory Stick slot Remote Control Terminal A/V R (*4) Power, etc Power Requirements Power Consumption Operating temperature Storage temperature HDMI Connection x 1 mini B / USB2. 0 Hi-Speed Memory Stick PRO Duo™ slot x 1 (When using optional remote commander, it is possible to control. / To use with COMPONENT or COMPOSITE output is impossible. ) DC6. 8V, 7. 2V (battery pack), DC8. 4V (AC Adaptor) 3. 8W (AVCHD recording, LCD back light ON, Recording mode: Initial condition) 0 ºC to 40 ºC (32 ºF to 104 ºF) -20 ºC to + 60 ºC (-4 ºF to +140 ºF) Including the Control unit: 81 x 107 x 42mm (3 1/4 x 4 1/4 x 1 11/16 inch) projecting parts Camera head: 37 x 42. 5 x 86. 5mm (excluding cable (1 1/2 x 1 11/16 x 3 1/2 inch) bush) Dimentions (w/h/d) Iincluding the projecting parts, and supplied Control unit: 81 x 122 x 47mm (3 1/4 x 4 7/8 x 1 7/8 inch) battery and Camera head: 37 x 42. 5 x 86. 5mm (1 1/2 x 1 11/16 x 3 1/2 inch) controller hook attached. (Excluding cable bush) 2. 8m (1101/8 inch) (between control unit and camera head, not detachable) Approx. [. . . ]