User manual INDESIT PIM 604 IX

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual INDESIT PIM 604 IX. We hope that this INDESIT PIM 604 IX user guide will be useful to you.


INDESIT PIM 604 IX : Download the complete user guide (5599 Ko)

Manual abstract: user guide INDESIT PIM 604 IX

Detailed instructions for use are in the User's Guide.

[. . . ] Description of the appliance Overall view 1 ELECTRIC HOTPLATE 2 Electric HOTPLATE INDICATOR LIGHT 3 Control Knobs for ELECTRIC HOTPLATES • ELECTRIC HOTPLATES may have different diameters and operate at different power levels. These power levels may be “normal” or “rapid” (the latter may be distinguished from the others by a red spot in the middle of the hotplate). € The ELECTRIC HOTPLATE INDICATOR LIGHT switches on whenever the selector knob is moved from the ‘off’ position. Before operating your new appliance please read this instruction booklet carefully. [. . . ] Electric hotplates The corresponding knob may be turned clockwise or anticlockwise and set to six different positions: Setting Normal o Fast Plate 2 3 R Connecting the supply cable to the mains Install a standardised plug corresponding to the load indicated on the data plate. The appliance must be directly connected to the mains using an omnipolar circuit-breaker with a minimum contact opening of 3 mm installed between the appliance and the mains. The circuit-breaker must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the circuitbreaker). The supply cable must not come into contact with surfaces with temperatures higher than 50°C. The installer must ensure that the correct electrical connection has been made and that it is compliant with safety regulations. Before connecting to the power supply, make sure that: • The appliance is earthed and the plug is compliant with the law. € The socket can withstand the maximum power of the appliance, which is indicated on the data plate. € The voltage is in the range between the values indicated on the data plate. If the socket is incompatible with the plug, ask an authorised technician to replace it. Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. The cable must be checked regularly and replaced by authorised technicians only (see Assistance). The manufacturer declines any liability should these safety measures not be observed. If the appliance is to be installed above a built-in electric oven, the electrical connection of the hob and the oven must be carried out separately, both for electrical safety purposes and to make extracting the oven easier. Please refer to the “Practical advice on using the appliance” section for a list of the relative positions and their recommended uses. Practical advice on using the electric hotplates To avoid heat loss and damage to the hotplates, use pans with a flat base, whose diameter is no less than that of the hotplate itself. setting Setting 0 1 2 3 4 5 6 Off Cooking vegetables , fish Cooking patatoes (using steam) soups , chickpeas , beans. For roasting (average) For roasting (above average) For browning and reaching a boil in a short time !Before using the hotplates for the first time, you should heat them at maximum temperature for approximately 4 minutes, without placing any pans on them. During this initial stage, their protective coating hardens and reaches its maximum resistance. This appliance has been designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. disposal General safety • This is a class 3 built-in appliance. [. . . ] € The European Directive 2012/19/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE INDESIT PIM 604 IX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual INDESIT PIM 604 IX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.