User manual INFOCUS LP610

[. . . ] 009-0279-00 (English) Don't Look Into The Lens! Be extremely careful not to look directly into the lens when the projector is on. [. . . ] Allow the projector to cool for at least 45 minutes before opening the lamp door to replace the lamp. Avoid touching the hot surfaces inside. Use Only The 610/620 Power Cord Definition of Safety Icons on Product Labels Always use the power cord that came with the projector. Although other cords might look the same, they have not been safety-tested with the 610 or 620. When you disconnect the projector, always remove the power cord from the electrical outlet first, then from the projector. Refer to the User's Guide for more information. Don't Defeat The Purpose Of The Grounding Plug The projector is grounded through the grounding conductor on the power cord. To avoid electric shock, plug the power cord into a properly wired receptacle. Avoid Liquid Spills Avoid hot surfaces. Don't set drinks on top of the projector. Spilled liquids can flow inside causing damage. Don't Block Ventilation Bulb explosion hazard. Openings in the case provide ventilation to protect the projector from overheating. [. . . ] Don't place the projector on top of or close to a computer or other heat-producing equipment. [. . . ]