User manual JBSYSTEMS RS 40 V1.0

[. . . ] The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. To take full advantage of all possibilities, please read these operating instructions very carefully. This product meets the requirements of the current European and national guidelines. [. . . ] The socket inlet shall remain operable for disconnection from the mains. The power cord should always be in perfect condition: switch the unit immediately off when the power cord is squashed or damaged. This appliance must be earthed to in order comply with safety regulations. Always replace a damaged fuse with a fuse of the same type and electrical specifications!In the event of serious operating problems, stop using the appliance and contact your dealer immediately. Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Check the contents: Check that the carton contains the following items: LM140 unit User manual 4 IEC-connectors Some important instructions: Before you start using this unit, please check if there's no transportation damage. Should there be any, do not use the device and consult your dealer first. Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. To protect the environment, please try to recycle the packing material as much as possible. Do not use volatile liquids such as benzene or thinner which will damage the unit. This means the preprogrammed chases can switch lamps ON/OFF to the music or with selected speed ( Static mode ): Music mode: set the audio knob (number 2) to the preferred value to determine the reaction to the music. Static mode (The Audio knob is turned to zero): The lamps will follow the selected chase at a speed that you can select with the speed knob (number 3) IMPORTANT !When both knobs (audio knob and speed knob) aren't set to zero, the lamps will react to the music (when there is sound). When there is no music, the lamps will automatically follow the selected chase with the speed that is selected on the speed knob HANGING BRACKET: with 2 handles on both sides to fasten the unit and a mounting hole to fix a mounting hook. AUDIO KNOB: With this knob, you set the sensitivity of the internal micro. [. . . ] This secondary safety attachment should be installed in a way that no part of the installation can drop more than 20cm if the main attachment fails. The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!Don't cover any ventilation openings as this may result in overheating. The operator has to make sure that the safety-relating and machine-technical installations are approved by an expert before using them for the first time. [. . . ]