User manual JBSYSTEMS SMART BEAM

[. . . ] Should there be any, do not use the device and consult your dealer first. Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to strictly follow the safety instructions and warnings in this user manual. The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. [. . . ] The dealer will not accept responsibility for any resulting defects or problems caused by disregarding this user manual. To protect the environment, please try to recycle the packing material as much as possible. Check the contents: Check that the carton contains the following items: User manual SMART BEAM BASE unit Power adapter To prevent fire or shock hazard, do not expose this appliance to rain or moisture. To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even cause damages. No objects filled with liquids, such as vases, shall be placed on this appliance. If a foreign object enters the unit, immediately disconnect the mains power. No naked flame sources, such as lighted candles, should be placed on the appliance. Don't cover any ventilation openings as this may result in overheating. minimum distances around the apparatus for sufficient ventilation is 5cm. CAUTION: To reduce the risk of electric shock, do not remove the top cover. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. This symbol means: indoor use only This symbol means: Read instructions This symbol means: Safety Class III appliance (example: JB Systems code: 2-0370) For more information on connections, please refer to the next chapter. Be sure to turn off the unit before you make changes to the different connections. BLIND PANELS: used to close the 2 unused compartments for additional SMART BEAM players. SMART BEAM PLAYER: the unit is specially prepared to receive up to 3 SMART BEAM players. MULTI-CONNECTOR CABLE: the unit contains 3 of these cables with multi-connector. SMART BEAM INPUT: this input is compatible with the 3 multiconnector cables of the SMART BEAM BASE. ANTENNA INPUT: the special "Belling-Lee" connector is used to feed the antenna signal to the FM-radio of the installed SMART BEAM players. [. . . ] SMART BEAM INPUT: this input is compatible with the 3 multiconnector cables of the SMART BEAM BASE. ANTENNA INPUT: the special "Belling-Lee" connector is used to feed the antenna signal to the FM-radio of the installed SMART BEAM players. You can connect a simple antenna or use an optional antenna cable (see picture) to connect the input to cable distribution. AUDIO OUTPUTS: the installed player(s) have their own cinch output that can be connected to the line input of any audio device. [. . . ]