User manual JVC KW-R520

[. . . ] Indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 26/10/2015 1:54:07 PM Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. [. . . ] Refer to [EASY EQ] for setting (  9) and the result is stored to [USER]. € To return to the previous setting item, press • To exit, press . 1 Press and hold 2 Turn the volume knob to select an item (see the following table), then press the knob. 01 / 02: Boosts low or high frequencies to produce a well-balanced sound at low volume. SPK-OUT *2 PRE-OUT *3 00 to +06 (+03): Adjusts the output level of the subwoofer connected via speaker lead. (  17) –08 to +08 (00): Adjusts the output level of the subwoofer connected to the lineout terminals (REAR/ SW) through an external amplifier. (  17) 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. default: XX EQ SETTING EQ PRESET Select a preset equalizer suitable to the music genre. ) FLAT (default) / HARD ROCK / HIP HOP / JAZZ / POP / R&B / TALK / USER / VOCAL BOOST / BASS BOOST / CLASSICAL / DANCE Adjust your own sound settings. ; LOW 55HZ / MID 85HZ / HIGH 120HZ: Audio signals with frequencies lower than 55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer. REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [SUB. €15 — +06 (00): Preset the initial volume level of each source (compared to the FM volume level). Indd 9 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 9 5/11/2015 4:43:37 PM AUDIO SETTINGS AMP GAIN LOW POWER: Limits the maximum volume level to 25. (Select if the maximum power of each speaker is less than 50 W to prevent damaging the speakers. ON: Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression. ON: Mutes the sounds while using the cellular phone (not connected through KS-BTA100). Depending on the speaker connection method, select the appropriate setting to get the desired output. (  Speaker output settings) Connection via speaker leads For connections without using an external amplifier. W Audio signal through rear speaker lead L (left) Rear speakers output Rear speakers output Subwoofer output R (right) Rear speakers output Rear speakers output (Mute) D. EXP (Digital Track Expander) TEL MUTING *5 SPK/PRE OUT *5 Does not work if [BT ADAPTER] is selected for [AUX] in [SRC SELECT]. € Remove burrs from the center hole and disc edge before inserting a disc. [. . . ] (  17) Bend the appropriate tabs to hold the mounting sleeve firmly in place. Caution • For safety’s sake, leave wiring and mounting to professionals. Do not touch the metal parts of this unit during and shortly after use of the unit. € Do not connect the wires of speakers to the car chassis or Ground wire (black), or connect them in parallel. [. . . ]