User manual KENWOOD C-V750

[. . . ] AV CONTROL CENTER C-V750 INSTRUCTION MANUAL KENWOOD CORPORATION B60-3214-00 CH (T) MC 98/12 11 10 9 8 7 6 5 4 3 2 1 97/12 11 10 9 8 7 6 Before applying power C-V750 (En/T) 2 Before applying power Units are designed for operation as follows. 3 Caution : Read this section carefully to ensure safe operation. Europe and U. K. AC 230 V only For the United Kingdom Factory fitted moulded mains plug 1. The fuse cover must be refitted when replacing the fuse in the moulded plug. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer. [. . . ] 1 VCR 2 AUX 3 TAPE 1 / MD 4 TUNER (frequency display) 5 CD 6 DVD-D 7 DVD-A / 6ch INPUT 8 LD -D 9 LD -A 0 CABLE / SAT GRC Main Menu ENTER Frequency display Tuner ENTER 8 9; ) ) MHz 2 Select the broadcast band. Main unit GRC Tuner Each press switches the indication. 1 FM 2 MW 3 LW ENTER O BAND FM Band ENTER -- 8 9; ) ) MHz "FM", "MW"or "LW" indicator 3 Select the tuning method. Main unit GRC O AUTO BAN ÷ You can also start the procedure from step 2 by omitting step 1. 1 AUTO lit (auto tuning) 2 AUTO not lit (manual tuning) AUTO Auto ENTER ÷ Usually, set the switch to AUTO (auto tuning). Lights up Select manual tuning when noise interferes due to weak radio wave. (The stereo broadcasting is received in monaural during manual tuning. ) 4 Select a station. Main unit GRC To increase frequency PTY SELECT TUNING Frequency display To increase frequency 8 9; ) ) AUTO MHz TUNED 100. 00 fm MHz "TUNED" lights up when a station is tuned. Auto tuning : The next station found is tuned automatically. Manual tuning : Press repeatedly or hold until a station is tuned. To decrease frequency To decrease frequency ENTER RDS (Radio Data System) C-V750 (En/T) Functions of RDS RDS is a system which transmits useful information (digital data) for FM broadcasts together with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions such as automatic display of the station name. 27 Functions made possible with RDS PTY (Program Type Identification) Search : The tuner automatically searches for a station which is currently broadcasting a specified program type (genre). The RDS indicator lights up when an RDS broadcast (signal) is received. RDS FM EON (Enhanced Other Network) reservation By selecting one of the three kinds of programme previously, the tuner switches automatically to a station broadcasting that kind of program whenever it starts broadcasting. When the broadcasting completes, the tuner returns automatically to the originally-received station. BBC 1 F M * Some functions may not be provided or be given different names depending on countries or areas. PS (Program Service Name) Display : See figure 1 below. When an RDS broadcast is received, the station name is automatically displayed. RT (Radio Text) display :See figure 3 below. Some of the RDS stations also transmit text data. When the RT display is selected with the RT key, the broadcast text is scrolled on the display. AUTO MEMORY This function automatically selects the stations providing RDS and FM broadcasting and stores them in the preset memory (up to 40 stations can be preset). Before using a function utilizing the RDS, be sure to perform the AUTO MEMORY operation by referring to the description in "Storing RDS stations automatically in the preset memory". DISPLAY key Main unit GRC Display mode priority ranking Pressing the RDS DISPLAY key changes the display contents. Tuner ENTER RDS ENTER When an FM broadcast is received : 1 PS (Program Service Name) Display 2 Frequency Display DISPLAY RDS PTY TA RDS Display ENTER 1 PS (Program Service Name) Display : When an RDS broadcast is received, the station name is automatically displayed. If no PS data was sent, "NO PS" is displayed. RDS FM BBC 1 F M RDS 2 Frequency Display : The frequency of the current station is displayed. FM -- 1 ) 2; 5 ) MHz RT key Main unit RT Text is scrolled from the right to the left. 3 RT (Radio Text) display: Text accompanying RDS broadcast is scrolled on the displayed during reception. "NO RT" is displayed if the received RDS station is not accompanied with RT data. RDS FM ABCDEFG HI RDS (Radio Data System) C-V750 (En/T) 28 Use the operating procedure on this page to store RDS stations automatically in preset memory. Up to 40 RDS stations can be preset and received with a simple key operation. This unit is compatible with the RDS so it can use convenient RDS functions including automatic tuning and EON reservation. RDS stations should be stored in the preset memory following the procedure in "Storing RDS stations automatically in preset memory" before listening to RDS stations. AV CONTROL CERTER KC-2 : Keys or controls to be used in this operation Storing RDS stations automatically in preset memory (AUTO MEMORY) The following procedure allows to select stations broadcasting RDS broadcast and store them in the preset memory (up to 40 stations can be preset). 1 Main unit Set the INPUT SELECTOR to "TUNER". Main unit INPUT 2 Set the receiving band to "FM". Main unit O BAND Each press switches the indication. 1 VCR Frequency display 2 AUX 3 TAPE 1 / MD 4 TUNER (frequency display) 5 CD 6 DVD-D 7 DVD-A / 6ch INPUT 8 LD -D 9 LD -A 0 CABLE / SAT ÷ The previously tuned frequency is displayed. 1 FM 2 MW 3 LW 8 9; ) ) MHz FM -- 3 Preset radio stations by AUTO MEMORY. Main unit In a few minutes, the stations with which RDS broadcast is received are stored in order beginning from preset channels "01" (up to 40 stations can be preset). Press the A. MEMO key. A. MEMO AUTO The "FM" indicator should light. AUTO ME MO Blinks When the number of stations providing RDS broadcasting is less than 40, some of other FM stations will be preset in the vacant channels. ÷ If stations have already been stored in preset channels, the same number of these preset channels as the number of stations are cleared and replaced with the data of the newly preset stations. Receiving a preset RDS station GRC 123 Enter the preset number (max. 40) of the desired RDS station. 456 789 0 +10 Press numeric keys in the order as described below: To enter "15" . . . . . . . . . . . 0 ENTER 0 ENTER ) ENTER ÷ If you commit a mistake in entering the digit of 10, press the 0 key several times to return to the original display and re-enter the preset number from the beginning. ÷ Press the RDS DISPLAY key to change the displayed information. RDS FM B B C 1 FM RDS (Radio Data System) C-V750 (En/T) The AUTO MEMORY function gives precedence to RDS stations and assigns them from preset number 1. Therefore, when it is required to preset RDS stations as well as non-RDS stations, execute the AUTO MEMORY operation first then proceed to the manual memory operation of non-RDS stations. Order of radio station presetting Other stations than the RDS stations can be stored in the preset memory by presetting them after the RDS stations preset by AUTO MEMORY as shown below or overwriting the RDS stations preset in some preset numbers. Preset number 12 39 40 1 AUTO MEMORY RDS stations (~ FM stations) 29 Preparation ÷ Select the TUNER input. & ~ 2 Manual memory FM stations or LW or MW stations Storing radio stations manually in preset memory GRC 1 Select the receiving band. [. . . ] Sound is not output from the surround speaker and/or center speaker, or their sound is very small. ÷ Speaker cords are short-circuited. ÷ The surround speaker cords and/or center speaker cord are disconnected. ÷ The surround and center speaker levels are set to the minimum positions. ÷ System control cords are connected incorrectly. £ ÷ Connect them by referring to the power amplifier's instruction manual. [. . . ]