User manual KENWOOD DPF-3030

[. . . ] CD PLAYER DPF-3030 INSTRUCTION MANUAL KENWOOD CORPORATION B60-4517-08 (EN) Introduction Before applying power 2 Units are designed for operation as follows. Caution : Read this section carefully to ensure safe operation. Europe and U. K. AC 230 V only Safety precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : Read this section carefully to ensure safe operation. WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The marking is located on the rear panel and says that the component uses laser beams that have been classified as Class 1. [. . . ] See the operating instructions supplied with your cassette deck and MD recorder for details. Maintenance Disc handling precautions Handling Hold the discs so that you do not touch the playing surface. Discs which can be played with this unit DVD (12 cm, 8cm), CD (12 cm, 8 cm), VCD, and the audio part of CDV, CDG, CD-EG and CD-EXTRA. Use discs that comply with the IEC standard, for example a disc carrying the COMPACT 9 marking on the label surface. DIGITAL AUDIO Label side Playing side Sticker Never play a cracked or warped disc During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent. Please do not use discs which are not round because they may cause a malfunction. Do not attach paper or tape to either the playing side or the label side of the discs. Sticky paste Cleaning If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner. Disc accessories The disc accessories (stabilizer, protection sheet, protection ring, etc. ) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction. Storage When a disc is not to be played for a long period of time, remove it from the player and store it in its case. Cleaning Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. Be specially careful against contact cleaners containing oil, for they may deform the plastic components. Note related to transportation and movement Before transporting or moving this unit, carry out the following operations. Verify that the display shown appears. TRACK no d1 SC 12345 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 3. Wait a few seconds and set the unit to STANDBY mode. Caution on condensation Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and the outside. In this case, leave the unit for a few hours with the power left ON, and restart the operation after the condensation has dried up. Be specially cautious against condensation in a following circumstance: When this unit is carried from a place to another across a large difference in temperature, when the humidity in the room where this unit is installed increases, etc. Controls and indicators 10 REPEAT indicator CCRS indicator EDIT indicator SINGLE TIME indicator TOTAL TIME indicator Program check indicator TRACK PGM REPEAT TRACK NO. CCRS EDIT P. C. SINGLE TOTAL TIME TIME TRACK mode indicator Program mode indicator 88 Play track No. indicator _8 8 : 8 8 12345 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Pause indicator Play indicator TIME indicator, program No. Output level indicator Music calender DISPLAY 1 2 34 5 6 7 8 POWER OPEN/CLOSE 1 4 7 0 2 5 8 3 6 9 +10 0 - ON ­ OFF 7 4 1 REPEAT 6 ¢ ¡ RANDOM P. MODE PHONES EDIT CHECK PEAK SEARCH CLEAR TIME DISPLAY 24 bit D. R. I. V. E. II 9 0 !@ # $ % ^ & * The keys with the same name as those on the remote control unit operate the same way as the remote control unit. 1 POWER switch 2P . MODE key Press for program playback. @ $ %( ( @ @ @ # 7 0 EDIT key Press to select the edit recording mode. * %( # !@ # ^ ) # 3 CHECK key Press to display the programmed contents in order. !CLEAR key Press to clear the contents of a program. 4 PEAK SEARCH key 5 Open/Close key (0) Opens and closes the disc tray. @ TIME DISPLAY key Press to switch the time display mode. # Remote control light sensor $ Disc tray Load the disc to be played back. 6 STOP key (7) 7 PLAY/PAUSE key (6) Each time the key is pressed, playback and pause switch each other. % Numeric keys Use the numeric keys to select the desired track. ^ REPEAT key Press to start repeated playback. & RANDOM key Press to start random playback. * Search keys (1, ¡) Fast forwards or fast reverses the track. 8 Skip keys (4, ¢) Press to skip to the beginning of another track. 9 PHONES jack Use to connect (optional) headphones. Operation of remote control unit The keys with the same name as those on the main unit operate the same way as the main unit. 1 Program-related and other keys RANDOM key ) REPEAT key ^ P . MODE key $ TIME DISPLAY key # EDIT key * CHECK key %( CLEAR key *2 OUTPUT (DOWN, UP) key 3 Numeric keys ( 1 ~ ) , 0 ) 4 Basic function keys Skip keys (4, ¢) Search keys (1, ¡) Stop key (7) Play/Pause key (6) 7 # 11 RANDOM 1 DISC SELECTOR 2 3 REPEAT 4 5 DISC SKIP 1 P. MODE 1 2 3 TIME DISPLAY 4 5 6 EDIT 7 8 9 3 %( CHECK 0 +10 # # @ @ CLEAR 7 6 4 OUTPUT DOWN UP ¢ ¡ 4 2 1 REMOTE CONTROL UNIT RC-P0305 Model: RC-P0305 Infrared ray system Loading batteries 1 Remove the cover. 3 Close the cover. 2 1 2 1 ÷ Insert two AA-size (R6) batteries as indicated by the polarity marking. Operation After plugging in the power cord, press the POWER switch of the main unit to turn the unit ON. When the unit is turned ON, press the key of the function to be operated. Remote control light sensor 6m 30 30 0 ÷ When pressing more than one remote control key successively, press the keys securely by leaving an interval of 1 second or more between keys. REMOTE CONTROL UNIT Operating range (Approx. ) RC-P0305 Notes 1. When the remote-controllable distance gets shorter than before, replace both batteries with new ones. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor. In such a case, change the system installation position to prevent the malfunction. Normal play (TRACK mode) Use the following procedure to play a CD in the original order of tracks from track No. 1. 12 1 2 5 8 3 6 9 +10 0 4 7 0 7 4 1 6 ¢ ¡ : Keys and control used in the operations described on this page. Playing tracks in order from track No. 1 1 Press the POWER switch to ON. POWER 0 - ON ­ OFF ÷ Playback starts when a disc has been loaded. 2 Load a disc. 1 Open the tray. OPEN/CLOSE 0 0 2 Place a disc. Label side 1 0 4 7 2 3 5 6 8 0 9 +10 7 4 6 ¢ Disc tray 1 ¡ ÷ Do not touch the played side of disc. [. . . ] ÷ Wipe off the dust on the disc surface referring 9 to "Disc handling precautions". ÷ Try selecting a place where no strong vibrations occur by changing the installation place, etc. ÷ If automatic play is not required, remove the disc from the player before setting the unit to POWER OFF. No sound. ÷ Play mode is not entered. ÷ Oscillation is applied to this unit. Music is interrupted. [. . . ]