User manual KENWOOD KDC-M4524

[. . . ] To prevent injury and/or fire, take the following precautions: Insert the unit all the way until it is fully locked in place. When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 0. To prevent short circuits, never put or leave any metallic objects (e. If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. [. . . ] When the <AF (Alternative Frequency)> (page 24) is ON, only RDS stations are put in the memory. When Auto Memory Entry is done in the FM2 band, the RDS stations preset in the FM1 band aren't put in the memory. Likewise, when it is done in the FM3 band, RDS stations preset in FM1 or FM2 aren't put in the memory. Select the frequency to put in the memory Press the [4] or [¢] button. Put the frequency in the memory Press the desired [1] -- [6] button for at least 2 seconds. On each band, 1 station can be put in the memory on each [1] -- [6] button. FM/ AM/ SCRL 4 ¢ PTY Switching to traffic information automatically when a traffic bulletin starts even when you aren't listening to the radio. Each time the button is pressed the Traffic Information function turns ON or OFF. When a traffic information station isn't being received the "TI" indicator blinks. Each time the button is pressed the Magazine Random Play turns ON or OFF. Playing the first part of each song on the disc or MP3 folder you are listening to and searching for the song you want to listen to. Release it when the song you want to listen to is played Press the [SCAN] button. Play the disc you want to attach a name to Enter Menu mode Press the [MENU] button for at least 1 second. Enter Name set mode Press the [4] or [¢] button for at least 2 seconds. Move the cursor to the enter character position Press the [4] or [¢] button. Each time the button is pressed the character typed switches as shown below. Character type Alphabet upper case Alphabet lower case Numbers and symbols Special characters (Accent characters) With the [FM] button you move 1 level down and with the [AM] button 1 level up. selecting a folder in the same level Press the [4] or [¢] button. With the [4] button you move to the previous folder, and with the [¢] button to the next folder. the Folder Select mode releases , and the MP3 in the folder being displayed is played. The methods for moving to other folders in the folder select mode are different from those in the folder search mode. When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. [. . . ] If there's no media in this unit, you can't switch to each source. If the Disc changer isn't connected to it's input terminal, You can't switch to an external disc source. 27 Reconnect the speaker wires so that each output terminal is connected to a different speaker. The TEL mute function turns ON even though the TEL mute wire is not connected. [. . . ]