User manual KENWOOD RAPID BAKE

[. . . ] Do not let the electrical supply cord hang over the edge of a work surface or allow it to touch hot surfaces such as a gas or electric hob. Do not place your hand inside the oven chamber after the bread pan has been removed as it will be very hot. Do not exceed the maximum capacities stated as this could result in over-loading the Bread Maker. [. . . ] It will stay in the keep warm mode for up to 1hour or until the machine is turned off, which ever is soonest. The Delay timer allows you to delay the bread making process up to 13 hours. The delayed start is not recommended for use with the dough, jam, gluten-free or rapid settings. IMPORTANT: When using this delayed start function you must not use perishable ingredients ­ things that `go off' easily at room temperature or above, such as milk, egg, cheese and yoghurt etc. To use the DELAY TIMER simply place the ingredients in the bread pan and lock the pan into the bread maker. Your breadmaker has a 15 mins power interruption protection in case the unit is accidentally unplugged during operation. Press the (+) TIMER pad and keep pressing until the total time required is displayed. You do not need to work out the difference between the program time selected and the total hours required as the bread maker will automatically include the setting cycle time. If the breadmaker is set up with the required recipe ingredients at 10pm the evening before, total time to be set on the delayed timer is 9 hours. Do not immerse either the Bread Maker body or the outside base of the bread pan in water. Dishwashing can damage the non-stick properties of the bread pan allowing bread to stick during baking. Clean the bread pan and the kneader immediately after each use by partially filling the pan with warm soapy water. If the kneader cannot be removed after 10 minutes, hold the shaft from underneath the pan and twist back and forth until the kneader is released. Use a soft damp cloth to clean the outside and inside surfaces of the Bread Maker if necessary. If you go past `9:00', simply press the (-) timer pad until you return to `9:00'. If you make a mistake or wish to change the time set, press the START/STOP pad until it beeps. [. . . ] You must add water to bread pan and allow kneader to soak before it can be removed. Breadmaker will not start until the countdown reaches the program start time. After programming control panel, press start button to turn bread maker on. [. . . ]