User manual KENWOOD X-SE9

[. . . ] FM/AM RECEIVER R-SE9T DP-SE9 X-SE9 CD PLAYER CASSETTE TAPE DECK INSTRUCTION MANUAL KENWOOD CORPORATION COMPACT DIGITAL AUDIO B60-3715-00 JA (T) AP AP WS DT 98/12 11 10 9 8 7 6 5 4 3 2 1 97/12 11 10 9 8 7 6 5 2 Before applying power Caution : Read this page carefully toBefore applying power ensure safe operation. R-SE9T/DP-SE9/X-SE9 (En) Units are designed for operation as follows. AC 120 V only For the United Kingdom Factory fitted moulded mains plug 1. The mains plug contains a fuse. 2. The fuse cover must be refitted when replacing the fuse in the moulded plug. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer. [. . . ] Select a station. When no stations have been memorized 1 Press the "mode" key to select the TUNING mode. "TUNING" will appear on the display for approximately 5 seconds. 1 SELECTOR mode 2 TUNING mode 3 BASS mode 4 TREBLE mode mode multi control 2 Knowledge sections \ 2 Turn the "multi control" knob 2 While "TUNING" is displayed, select a station with the control knob. Auto tuning : Each time the knob is turned, the next broadcast station will be tuned in. When stations have been memorized (preset call) Every time the key is pressed, the preset stations are switched over as follows. Remote control unit 4 P. CALL ¢ Select a station Press ¢for the order of 1=2=3 . . . 3=2=1=40. . . Hearing sound 27 R-SE9T/DP-SE9/X-SE9 (En) Collective presetting of stations (auto preset) 1 Receive a FM broadcast. 2 Keep the "enter" key depressed (for 2 sec or enter more). During recording, the indicator "A MEMO" flashes. ÷ Up to 30 stations can be memorized. ÷ For use of the RDS function, stations must be memorized by RDS auto presetting. If there is memory left after presetting, the receiver continues presetting regular FM stations. AUTO One-by-one presetting (manual preset) 1 Press the "enter" key during reception. enter Presetting is cancelled when no operation is executed for 5 seconds or more. A MEMO Preparation section "MEMO. " lights (for approx. TUNED ÷ For memorizing of stations other than RDS stations (FM, AM), memorize the stations according to chapter "Oneby-one presetting (manual preset)". 2 Select one of the preset numbers from 1 to 40. Presetting is cancelled when no operation is executed for 5 seconds or more. multi control )AUTO ST. MHz Goes off 3 Press the "enter" key again. enter ÷ Repeat steps 123 to preset other stations. ÷ If several stations are preset under the same number, the previous memory is replaced with the latest memory contents. )3 MHz Basic section R-SE9T AUTO Select the tuning mode. auto/mono Each press alternates the mode. 1"AUTO" lit (Auto tuning) 2"AUTO" not lit (Manual tuning) FM 8 8 . ) ) MHz Application section "TUNING" appears (for approx. TUNED Use the manual tuning mode when reception is noisy due to weak reception. (In the manual mode, stereo broadcasts are received in monaural. ) Frequency display R-SE9T ÷ Normally, use the AUTO (Auto tuning) mode. FM 8 9 . ) ) About display change during tuner reception MHz The "TUNED" indicator lights when a station is received. ÷ When a key is held depressed, preset stations will be skipped at an interval of about 0. 5 second. ÷ Preset calls also can be made by numerical input via the numeric keys on the remote control. When the key for the tens digit has been pressed erroneously at the time of input, press the +10 key several times to return to the original display and then enter the number again. The display will change each time the DISPLAY key is pressed. 1Reception band/Frequency 2Preset number/Frequency 3Clock The display will change each time the RDS DISPLAY key is pressed. 1 PS (Program Service Name) Display 2Reception band/Frequency Knowledge sections 28 Recording Note Recording R-SE9T/DP-SE9/X-SE9 (En) Recording Note that this cassette deck cannot record onto Metal tapes. 4 Preparation section 3 3 1 5 2 Basic section 0 1. Load a tape in deck. Top side 1 1 Open the tray of the cassette deck. [. . . ] ­15 dBm ~ ­21 dBm (wave length 660 nm) Preparation section [FM Tuner section] Tuning frequency range . . . . . . . . . . . . . . . 1. 2 µV (75 ) / 13. 2 dBf (40 kHz DEV. , S/N 26 dB) Signal to noise ratio (DIN weighted at 1 kHz, 65. 2 dBf input) MONO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 dB STEREO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 dB Selectivity (DIN ±300 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]