User manual KENWOOD XD-302

[. . . ] COMPACT HIFI SYSTEM XD-A31 XD-302 XD-352 XD-372S XD SERIES INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area. B60-4304-08 00 MA (K, M, T, X, Y) OC 99/01 2 Before applying power Units are designed for operation as follows. Caution : Read this page carefully to ensure safe operation. XD SERIES (En) U. S. A. AC 120 V only Austraria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 110-120 /220-240 V switchable AC voltage selection This unit operates on 110-120 or 220-240 volts AC . [. . . ] Normal playback This part changes in 3 stages, depending on the display mode. ÷ When "Display Auto" is selected, the display mode during CD playback changes to "Display 1", "Display 2" and "Display 3" every time the track changes. ÷ "Display 3" is displayed regardless of the current music signal. 16 Playback of CDs Sequential playback from the first track XD SERIES (En) If a disc has already been loaded in the CD player and the power is OFF, simply pressing the CD play key turns power automatically ON and starts playback. DISC SKIP To stop Playback 1 POWER TIME SLEEP 2Playback/ To To pause Playback MULTI CONTROL High-speed search in forward and reverse directions SOUND EX. BASS INPUT RANDOM REPEAT BAND DISC SKIP A/B TAPE 3 1 TUNING ¡ 4 P. CALL ¢ 2 3 6 7 MUTE 2 Playback/ To To pause Playback To stop Playback APLAY Skipping tracks SELECT MULTI CONTROL MENU ENTER VOLUME XD REC/ PLAYB Skipping tracks 1. Disc played first when the 6 key is pressed. MULTI CONTROL The label must be on top. Disc number 1 2 The tray opens when the key is pressed and closes when the key is pressed again. APLAY REC/ PLAYB 2. Start playback. ÷ After a few seconds, play starts from track No. 1. (Relay play) ÷ When tho OPEN/CLOSE (0 ) key is pressed during playback, the tray opens but the playback continues. (The DISC SKIP key is inoperative at this time. ) To pause playback To stop playback ÷ Each press pauses and plays the CD alternately. Playback of CDs 17 Playback from the desired track Skipping tracks ÷ The tracks in the direction the dial is rotated are skipped, and the selected track will be played from the beginning. ÷ When the jog dial is rotated a little in the direction of counterclockwise once during playback, the track being played will be To skip To skip played from the beginning. backward forward ÷ The CD tracks can also be skipped using the 4 or ¢ key of the remote control unit. XD SERIES (En) Skipping to a Different Disc DISC SKIP (Only at the main unit) DISC 1 DISC 2 DISC 3 or DISC SKIP High-speed search in forward and reverse directions (Remote control unit only) 1 TUNING ¡ Backward search Forward search ÷ Each time this key is pressed, the unit skips to the next disc and playback starts. ÷ When no disc is set in a tray, the unit skips to the next tray. ÷ Playback starts from the selected disc. ÷ When no disc is set in a tray, the unit skips to the next tray. ÷Playback starts from the position where the key is released. Time display on the CD player Each press of the TIME key of the remote control unit switches the displayed time information. Operation ÷ Do not touch the played side of disc. ÷ Rotate the tray with the DISC SKIP key to insert the third disc. 1 2 3 @1 : 1 2 -4:18 12:46 Elapsed time of track being played Remaining time of track being played Elapsed time of disc ("TOTAL" lights up) Remaining time of disc ("TOTAL" lights up) The selected disc is indicated. 4- 63:14 CD01 0:00 ÷ Only the elapsed time of the track being played is displayed during program playback and random playback. Lights when a disc is inserted at the time of playback. Caution for Disc Handling Do not use a disc with exposed adhesive from attached cellophane or a rental CD seal, or from which such a seal etc. When such a disc is played, removal may become impossible, and trouble can be caused. CAUTION Do not look into the laser light. Laser light getting into your eyes can impair your vision. 18 Playback of CDs XD SERIES (En) Listening in the desired sequence (program playback) Any titles on the discs in the tray can be listened to in the desired sequence. 32 titles) Select the "CD" input. 1 Check that the CD player is in the stop mode. If it is in play mode ÷ If the operation in step 2 is performed during playback of a track, the current track can be programmed as the first track in the program. 2 Select "CD Program Play". MENU SELECT The following items can be selected by turning the MULTI CONTROL jog dial. "CD Program Play" ("Recording Options") "Sound Options" "Clock Options" +Scrolled display (CD Program Play) Operation CD Program Enter track No. s in 3 want to play them. the order you 1 Select the disc. SELECT +Scrolled display (Select Disc/Track No. ) Select Dis P01 2 Select the track. D1 T01 Lights SELECT P01 D1 T01 (To select other tracks, repeat steps 1 and 2 for each of the additional tracks. ) 3 Press the ENTER key. TE R ÷ Even if you program a disc or track which does not exit in the tray, it is deleted automatically in playback. ÷ By turning the Jog dial and displaying "Return, " you can return to the previous step and do a procedure over again. When "Full" is displayed, no more tracks can be programmed. EN +Scrolled display (Press 'ENTER' to Start, 'JOG' to Check ) (Go to step 5 if you do not need to check the program contents. ) Press 'ENT Playback of CD 19 XD SERIES (En) Check the programmed tracks 4(and replace, add or delete tracks as required). To check: Press the TIME key on the remote control unit to switch the time display. P01 D1 T02 ÷ The programmed tracks are displayed in sequence. To replace a track in the program: 1 Select the programmed disc or track to be replaced and press the SELECT key. 2 Select a disc or track to replace the disc or track selected above (step 3-1 and 2). P12 D3 T04 P12 D3 T04 SELECT ÷ The blinking item can be replaced. To add a track to the program: 1 Select the display as shown on the right and press the SELECT key. SELECT Operation P-- D- T-- 2 Perform the same operations as in step 3-1 and 2. ÷ The added track number is added to the end of the existing program. To delete a track from the program: 1 Select the programmed disc or track to be cleared and press the SELECT key. SELECT P12 D3 T04 P12 clear 2 Select "clear" and press the SELECT key. To quit the program mode 1 Select "CD Program Play". 5Enter it. R TE EN MENU SELECT (Playback starts from the first programmed track (program No. 1)) ÷ Turn the MULTI CONTROL jog dial during program playback to the previous or next programmed track. ÷ When the jog dial is rotated a little in the direction of counterclockwise once during playback, the track being played will be played from the beginning. ÷ To check (modify, add or delete) the programmed tracks after playback, perform the operations in steps 2 and 4. 2 Press the MENU key. MENU Goes off ÷ If the key is pressed during playback, normal playback in order of tracks resumes from the current track. [. . . ] 1. 8 V / 0. 6 k [ Cassette deck section ] Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-track, 2-channel stereo Recording system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC bias system (Frequency: 105 kHz) Heads B deck Playback / recording head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Erasing head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]