User manual KENWOOD XD-751

[. . . ] COMPONENT SYSTEM/COMPACT HI-FI SYSTEM XD SERIES XD-751/XD-701 XD-771S XD-551/XD-501 XD-571S INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area. B60-3768-00 00 MA MC (Y, M, X, T, Q) 99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 6 5 4 3 2 1 2 Before applying power Units are designed for operation as follows. and Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In such a case, press the A/B key during recording to reduce or suppress the beat noise. The A/B key acts as the demonstration key except during tuner recording. Preparation section A/B Points in CD recording Basic section When recording CD tracks onto a tape, if you leave the cassette deck in record-pause mode beforehand, the cassette deck recording can be started at the same time as the CD starts to be played. (The CD player pauses at the beginning of the selected track. ) 3 Put the cassette deck in Record-pause mode. (Synchro recording starts) Knowledge sections Application section ÷ Recording stops when the stop key of the CD player is pressed. Let's record XD-SERIES (En) 33 Copying tape (Tape dubbing) The contents of the tape in deck A can be copied onto the tape in deck B. 1 Select the "TAPE" input. INPUT Load tapes in the decks. Playing tape A A Recording tape 2 Select "[" (double-side recording) or """ (one-side recording). REV. MODE Preparation section 3 Press the DUBBING key. DUBBING CD RECORD CD EDIT CD PGM RECORD TAPE DUBBING 4 Select "TAPE DUBBING" and press the SET key. 1. Select. MULTI CONTROL TAPE D UB B I | Scrolled display (TAPE DUBBING) 2. Press SET. Basic section ÷ When recording is started, the tape will be transported in the direction selected in this step. SET Check the tape transport direction indicators. 5 Use the same tape transport directions. Press SET. B DIR FWD B DIR RVS RETURN Application section SET (2) Select the transport direction of deck B. MULTI CONTROL ÷ By selecting "RETURN" and pressing the ENTER key, the operation returns to the previous step so the current step can be restarted. ÷ Dubbing ends automatically when the side(s) to be dubbed has been completed. To stop dubbing REC/ARM Knowledge sections 6 Start dubbing. ENTER ÷ The deck B will stop after creating a non-recorded portion of about 4 sec, and then the deck A will stop. Note that the non-recorded space is not created in this case. The DOLBY NR key is not active in dubbing mode. The tape recorded on deck B assumes the same Dolby NR condition as the tape played on Note deck A. 34 Playback of CD XD-SERIES (En) Listening in the desired sequence (program playback) Any titles on the discs in the tray can be listened to in the desired sequence. 32 titles) Select the "CD" input. Preparation section 1 Check that the CD player is in the stop mode. If it is in play mode ÷ Press the CD PGM key during to program the track being played. 7 2 Press the CD PGM key. CD PGM | Scrolled display (SELECT DISC) sE L E CT AD I s 3 Enter track Nos. Press SET. | Scrolled display (SELECT TRACK) Application section SET sE L E CT AT R A 2 Select the track. 1. Press SET. P0 1 TN O O1 SET ÷ Even if you program a disc or track which does not exit in the tray, it is deleted automatically in playback. Knowledge sections To select other tracks, repeat steps 1 and 2 for each of the additional tracks. ÷ Up to 32 tracks can be programmed. When "FULL" is displayed, no more tracks can be programmed. 3 Enter it. ENTER ENTER Playback of CD XD-SERIES (En) 35 4 Check the programmed tracks (and replace, add or delete tracks as required). To check: MULTI CONTROL P0 1 D2 T 0 2 ÷ The programmed tracks are displayed in sequence. To replace a track in the program: MULTI CONTROL 1 Select the programmed disc or track to be replaced and press the SET key. SET P1 2 D3 T O 4 ÷ The blinking item can be replaced. 2 Select a disc or track to replace the disc or track selected above (step 31 and 2). Preparation section To add a track to the program: MULTI CONTROL 1 Select the display as shown on the right and press the SET key. SET P- - D- T - - 2 Perform the same operations as in step 3-1 and 2. ÷ The added track number is added to the end of the existing program. To delete a track from the program: MULTI CONTROL 1 Select the programmed disc or track to be cleared and press the SET key. SET Basic section P1 2 03 T O 4 P1 2 CL EA R 2 Select "CLEAR" and press the SET key. To end the above operation: To perform an operation in step 4 after ending it, press the CD PGM key once. Application section ENTER CD PGM 5 Start playback. 6 ÷ When the 4 or the ¢ key is pressed during play, the program will jump to the preceding or the following track respectively. ÷ When the 4 key is pressed once during playback, the play position returns to the beginning of the current track being played. To quit the program mode Press twice. or more) CD PGM Knowledge sections PGM01 MENU T O1 0 O0 Remote control unit ÷ If you are using the remote control unit, press the key once again while "CD PGM" is displayed. CD 01 ÷ If the key is pressed during playback, normal playback in order of tracks resumes from the current track. 36 Playback of CD XD-SERIES (En) Repeated playback Desired titles or discs can be played back repeatedly. Select the "CD" input. To repeat a disc Preparation section 1 Confirm that the "PGM. . . . . " indicator is not lit. CD PGM If the "PGM. . . . . " indicator is lit, press the CD PGM key to turn it off. CD 01 0 00 2 Press to select "DISC REPEAT". REPEAT Press the key repeatedly to switch the display. 1 2 3 4 REPEAT DISC REPEAT ALL REPEAT REPEAT OFF | Scrolled display (DISC REPEAT) DIsC R EP E A 3 Select the disc. DISC SKIP To stop repeated playback Press the REPEAT key 3 times to select "REPEAT OFF". Application section To repeat all discs 1 Confirm that the "PGM. . . . . " indicator is not lit. If the "PGM. . . . . " indicator is lit, press the CD PGM key to turn it off. CD 01 0 00 2 Press to select "ALL REPEAT". Press the key repeatedly to switch the display. 1 2 3 4 REPEAT DISC REPEAT ALL REPEAT REPEAT OFF | Scrolled display (ALL REPEAT) Knowledge sections REPEAT AL L RE PE A T 3 Select the disc to be played first. DISC SKIP To stop repeated playback Press the REPEAT key twice to select "REPEAT OFF". Playback of CD XD-SERIES (En) 37 Select the "CD" input. To repeat only one track 1 Confirm that the "PGM. . . . . " indicator is not lit. CD PGM Preparation section If the "PGM. . . . . " indicator is lit, press the CD PGM key to turn it off. 2 Select "REPEAT". REPEAT Press the key repeatedly to switch the display. 1 2 3 4 REPEAT DISC REPEAT ALL REPEAT REPEAT OFF RE P E AT AC K Basic section 3 Select the disc. DISC SKIP 4 Select the track. 1 2 3 4 5 6 7 8 9 To stop repeated playback Press the REPEAT key 4 times to select "REPEAT OFF". 0 +10 Application section To repeat only the programmed tracks 1 Perform the procedure in "Listening in the desired sequence (program playback)" till step 4 to program the desired CD tracks. >fi 2 Select "PGM REPEAT". REPEAT ÷ All of the programmed tracks will be played repeatedly. Press the key repeatedly to switch the display. 1 PGM REPEAT 2 REPEAT OFF Knowledge sections 3 Start playback. CD PG M RE PE A T To stop repeated playback Press the REPEAT key twice to select "REPEAT OFF". 38 Playback of CD XD-SERIES (En) Listening to an unexpected title sequence (random playback) As the titles each time are selected randomly, the music can be enjoyed without getting tired of it. Select the "CD" input. Preparation section 1 Confirm that the "PGM. . . . . " indicator is not lit. CD PGM CD 01 If the "PGM. . . . . " indicator is lit, press the CD PGM key to turn it off. 0 00 2 Select the RANDOM mode. For "ONE DISC RANDOM" playback, select the disc in advance. Press the key repeatedly to switch the display. [. . . ] 65. 0 MHz ~ 74. 0 MHz MW (AM) Tuner section Tuning frequency range Europe, U. K. Other countories 9 kHz step . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . and Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531 kHz ~ 1, 602 kHz 531 kHz ~ 1, 602 kHz 530 kHz ~ 1, 610 kHz 530 kHz ~ 1, 700 kHz Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bass-reflex type, magnetically shielded Speaker configuration Woofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]