User manual KODAK ESP5

[. . . ] All-in-One Printer print copy scan User Guide Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2008 Kodak is a trademark of Eastman Kodak Company. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. , and any use of such marks is under license. (Image Recognition Integrated Systems), All Rights Reserved P/N 1K3269 Rev D January 2009 Table of Contents 1. . 17 17 18 19 19 Kodak ESP Printer User Guide i Table of Contents Printing Photos from a PictBridge Camera . [. . . ] If you select Photo, a text document will be scanned as an image file, and cannot be read by optical character recognition software. You must create a list of one or more applications using Home Center software for any to display by name in the Scan Destination settings. In addition, before using a Scan Destination setting of File, familiarize yourself with the location where the file will be saved, and with the file naming setting. This will prevent problems later in finding the scan file on your computer. For more information, see the Home Center help. Kodak ESP 5 Printer User Guide 31 Scanning Your Pictures 32 Kodak ESP 5 Printer User Guide 7 Maintaining Your Printer The Kodak ESP 5 All-in-One printer requires little maintenance. However, you should regularly clean the scanner glass and lid backing to remove dust and fingerprints. Fingerprints and other debris on the glass or lid backing could slow down performance and affect the quality and accuracy of scanning. For recycling and or disposal information, contact your local authorities. In the U. S. , visit the Electronics Industry Alliance Web site at www. eiae. org. General Care Caution: Always disconnect the power on the this All-in-One printer before cleaning it. Do not use harsh or abrasive cleaners or organic solvents on the printer or any of its parts. · To clean the printer, wipe the outside with a clean, dry cloth · Keep the surrounding area vacuumed and litter-free · Protect the printer from tobacco smoke, dust, sand, other small particles (such as crumbs), and liquid spills · Avoid placing objects on the printer · Keep the printer supplies away from direct sunlight and out of high-temperature environments · Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the printer · If the printer has been exposed to bad weather or has water inside it, turn it off and let it dry completely. If this does not solve the problem, contact customer support (see "Telephone Customer Support" on page 57) Kodak ESP 5 Printer User Guide 33 Maintaining Your Printer Cleaning the Scanner Glass For good copies and scans, ensure the printer's scanner glass and lid backing are clean; dust the exterior as needed. Warning: Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, as they can damage it. Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner. Dry the glass with a lint-free cloth. 4 When finished cleaning, plug in the printer. Cleaning the Scanner Lid Minor debris can accumulate on the document backing located underneath the scanner lid of the Kodak printer. Warning: Do not use paper-based wipes, as these might scratch the underside of the scanner lid. Do not use harsh or abrasive cleaners or organic solvents on the printer or any of its parts. Clean the underside with a soft cloth or sponge, slightly moistened with a mild soap and warm water. 5 If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the underside thoroughly with a damp cloth to remove any residual alcohol. 6 When finished cleaning, plug in the printer. Monitoring and Adjusting the Printer's Performance From the Control Panel, you can perform many tasks to keep this printer in good working order. For example, you can check the status of the printer's inkjet nozzle to ensure highquality prints. Kodak recommends that you run a nozzle check if you are experiencing changes in image quality. You can also use the Printhead Alignment function if you see degradation in print quality. 34 Kodak ESP 5 Printer User Guide Chapter 7 1 2 3 Make sure that there are 5 - 10 sheets of plain paper loaded in the paper tray. until the desired option is selected. 4 As needed, press 5 Press OK. 6 Follow the prompts in the display screen to initiate or cancel the task. Tip: A printhead alignment and a check of the inkjet nozzle can also be initiated from the Home Center software. Windows: Open the Home Center Help panel byclicking Help on the Home Center window, as needed. Click Maintenance, and then click Nozzle Check or Printhead Alignment. Macintosh: Open the Home Center window and click Maintenance, and then click Nozzle Correction or Printhead Alignment. These available maintenance options are shown in the table below: Maintenance Options Menu Options Check Ink Levels Nozzle Check Printhead Alignment Clean Printhead Print Demo Sheet Print Test Page Format Memory Card Select OK OK OK OK OK OK OK Warning: Formatting will erase all the data on a memory card. Kodak ESP 5 Printer User Guide 35 Maintaining Your Printer Replacing Ink Cartridges Your Kodak printer uses separate black and color ink cartridges. [. . . ] Warning: Do not expose this product to liquid, moisture, or extreme temperatures. Kodak alternating current (AC) adapters are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/ or electrical or mechanical hazards. Caution: Adjust only those controls covered in the user guide or setup instructions. For more information, go to www. Kodak. com/go/MSDS. Kodak ESP 5 Printer User Guide 67 Product and Safety Specifications Regulatory Compliance FCC Compliance and Advisory This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]