User manual KRUPS RESPRESSO NOVO 2100 PLUS

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KRUPS RESPRESSO NOVO 2100 PLUS. We hope that this KRUPS RESPRESSO NOVO 2100 PLUS user guide will be useful to you.


KRUPS RESPRESSO NOVO 2100 PLUS : Download the complete user guide (4077 Ko)

Manual abstract: user guide KRUPS RESPRESSO NOVO 2100 PLUS

Detailed instructions for use are in the User's Guide.

[. . . ] Do not place on or near a hot gas or electric burner, or in a heated oven. To disconnect, turn switch to "OFF", then remove plug from wall outlet Do not use appliance for other than intended use. Use extreme caution for other than intended use. SA VE THESE INSTRUCTIONS SPECIAL CORD SET INSTRUCTIONS Regarding your Cord Set: A. A short power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. [. . . ] If you wish to make an espresso immediately after using the steam function, the appliance must first be allowed to cool down in order to achieve the correct temperature for preparing an espresso. . To do this, place a container below the filter holder (without coffee) and position correctly, then turn the selector to the . besetting (10). AlIow the water to follow through until the orange indicator setting. After this, you can make another espresso. Ix~gand af£er:us~~Nth~':Ill~chinel the metallic parts' of th~:~. !ea~ noz~lec~n'becoJ Click here to see steps 20- 27. . Frothing Milk The Perfect Froth attachment makes it easy to produce frothy, steamy milk for making a cappuccino or latte. . Mount the Perfect Froth attachment to the end of the steam nozzle (18). . Fill the water container with fresh, cold water (1) (2) (3) and turn on the appliance . Move the steam nozzle to the exterior of the appliance. (5). Take a stainless steel frothing pitcher and filI it 1/3 to 1/2 full with fresh, cold milk. The milk and frothing pitcher must be well chiIled (so it is not advisable to run the frothing pitcher under hot water before frothing the milk). We recommend using skim or 2% milk if you prefer a stiff, dense froth. Turn the selector to the . nro setting (19). Once the appliance reaches the right temperature, the orange temperature control light will go out. . Hold the frothing pitcher under the steam nozzle equipped with the Perfect Froth attachment in such a way that the tip is immersed in the milk. . Do not allow the tip of the nozzle to touch the bottom because this could obstruct the passage of the steam. Note: Do not bring mi1kto a boil (this wilI happen if large bubbles start forming at the surface of the mi1k). Once the froth has been produced, turn the selector to the order to prevent the milk from drying on the steam nozzle: . f\Jijsetting (19) for the folIowing cleaning operation in - Remove the container. - Place an empty container under the steam nozzle. - Select the \filr setting again (20) to remove the milk residue. - Clean the steam nozzle and the Perfect Froth attachment with a damp cloth. For more thorough cleaning of the Perfect Froth attachment, please refer to the section on « Cleaning the Machine ». Heating liquids Heating liquids is done with the steam nozzle only (without the Perfect Froth attachment) . Turn the selector to the t\AJsetting (19). Once the appliance reaches the correct temperature, the orange temperature control light will go out. . Immerse the steam nozzle in the container holding the Jiquid to be heated. Then turn the selector to the ~ setting (20) until the Jiquid is hot enough, then reset the selector to the 0 setting and remove the container. For liquids other than water, turn the selector to the nnr setting (19) for the following cleaning operation in order to prevent any blockage of the opening of the steam nozzle: . - Place an empty container below the steam nozzle. - Select the ~. setting again (20) to remove the residue of the liquid. - Turn the selector to the setting O. - Clean the steam nozzle with a damp cloth. For more thorough cleaning of the nozzle, please refer to the section on « Cleaning the Machine ». Click here to see steps 20 - 27. Cleaning the Machine . Never wash your espresso machine accessories in the dishwasher. After use, the water container must be emptied. . Removable drip tray After using the appliance, remove the overflow grid and empty the removable drip tray (21) (22). If several espressos are being prepared one after the other, the drip tray should be emptied from time to time (about once every 7 espressos). If necessary, clean the drip tray and its grid (21) (22) with water and a little non-abrasive dishwashing liquid, rinse and dry. When reassembling the machine, ensure that the plastic baffle lining is in the right place (23). -8 . [. . . ] This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. GUARANTEE OF PERFORMANCE This fine KRUPS product is manufactured according to a rigid code of quality standards, and, with minimum care, should give years of satisfying service. However, should the need arjse for repair or for replacement parts within or after the warranty period, please call our CONSUMER SERVICE DEPARTMENT: E. - 4:30 p. m. You wiIl be provi~ed with specific instruction on how to get your product repaired. The department wilI also be able to answer any general product questjons you may have. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KRUPS RESPRESSO NOVO 2100 PLUS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KRUPS RESPRESSO NOVO 2100 PLUS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.