User manual LA CROSSE TECHNOLOGY WS-7026U

[. . . ] WS-7026U Wireless 433 MHz Radio-Controlled Weather Station Instruction Manual Topic Inventory of Contents/Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Function Keys 12/24 Hour Time Setting Time Zone Setting Daylight Saving Time Setting Time Setting (WWVB & Manual) Setting Day, Date and Year Selecting °F or °C Setting the LCD Contrast Features Back Light Weather Forecast Icons Indoor Temperature, Humidity & Comfort Level Indicator Outdoor Temperature & Humidity Minimum & Maximum Records (Indoor, Outdoor & Resetting) Alarm (Setting, Snoozing & Stopping) Additional Remote Control Sending Units (Set-Up, Viewing & Operation) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information 2 Page 3 4-5 5 5-6 7 7 7-8 8 9-10 10 11 11 12 12-13 14 14 14-15 15-16 16-18 18-20 21 22 23 24 TABLE OF CONTENTS INVENTORY OF CONTENTS 1. Instruction Manual and Warranty Card. Figure 1 Time LCD Date LCD Forecast LCD Indoor LCD Outdoor LCD Figure 2 ADDITIONAL EQUIPMENT (not included) 1. One Philips screwdriver. ABOUT WWVB (Radio Controlled Time) The NIST (National Institute of Standards and Technology--Time and Frequency Division) WWVB radio station is located in Ft. Collins, Colorado and transmits the exact time signal continuously throughout the United States at 60 kHz. [. . . ] The WS-7026U averages past air-pressure readings to provide an accurate forecast--creating a necessity to disregard all weather forecasting for 12-24 hours after the unit has been set-up, reset or moved from one altitude to another (i. e. In areas where the weather is not affected by the change of air pressure, this feature will be less accurate. 11 A. WEATHER ICONS There are 3 possible weather icons that will be displayed in the FORECAST LCD: Sunny--indicates that the weather is expected to improve (not that the weather will be sunny). Sun with Clouds--indicates that the weather is expected to be fair (not that the weather will be sunny with clouds). Clouds with Rain--indicates that the weather is expected to get worse (not that the weather will be rainy). The weather icons change when the unit detects a change in air pressure. "MIN" appears in the upper-center location of the flashing INDOOR LCD, indicating that the minimum temperature (along with the humidity measured at that time) and the time and date of occurrence are displayed. Press the IN button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears in the upper-center location of the flashing INDOOR LCD, indicating that the maximum temperature (along with the humidity measured at that time) and the time and date of occurrence are displayed. While "MAX" is still displayed, press the IN button again to return to the current data display. Or you can wait 20 2. 3. 13 seconds, during either the minimum or the maximum readings, and the unit will automatically return to current data readings. "MIN" appears in the uppercenter location of the flashing OUTDOOR LCD, indicating that the minimum temperature, the time and date of occurrence are displayed. Press the OUT button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears in the uppercenter location of the flashing OUTDOOR LCD, indicating that the maximum temperature, the time and date of occurrence are displayed. While "MAX" is still displayed, press the OUT button again to return to the current data display. Or you can wait 20 seconds, during either the minimum or the maximum readings, and the unit will automatically return to current data readings. 2. 3. C. All the Indoor records (minimum and maximum) will be reset after the IN button is pressed and held for 5 seconds. All the Outdoor records (minimum and maximum) will be reset after the OUT button is pressed and held for 5 seconds. VI. SETTING THE ALARM (alarms 1 and 2) Note: There are two alarms that can set. Press and hold the AL1 button for 5 seconds or until the alarm-time display flashes in the DATE LCD. 14 2. 5. 6. 7. Press the IN button to set the alarm hours and the OUT button to set the alarm minutes. Press the AL1 button or wait 15 seconds for the unit to automatically confirm the alarm time and return to display the date in the DATE LCD as normal. [. . . ] NOTE: For problems not solved, please contact La Crosse Technology. 20 MAINTENANCE AND CARE INSTRUCTIONS · · · · · Extreme temperatures, vibration and shock should be avoided to prevent damage to the units. Immediately remove all low powered batteries to avoid leakage and damage. Contact La Crosse Technology for repairs. 21 SPECIFICATIONS Temperature measuring range: Indoor: 32°F to 139. 8°F with 0. 2°F resolution. Relative Humidity measuring range: Indoor Temperature checking interval: Indoor Humidity checking interval: Outdoor Temperature and Humidity checking interval (Thermo Hygro Sensor): Outdoor Temperature and humidity reception (Weather Station): Transmission Range: Power Supply: Weather Station: Sensor: Battery life cycle: Recommended battery type: Dimensions (L x W x H) Weather Station (without stand): Thermo Hygro Sensor: 19% to 95% with 1% resolution. [. . . ]