User manual LA CROSSE TECHNOLOGY WS-7138U

[. . . ] WS-7138U Wireless 433 MHz Wireless Weather Station Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/Additional Equipment Quick Set-Up Guide Detailed Set-Up Guide Battery installation Program Mode Program Sequence and Default Settings Function Keys Setting the Temperature Format Setting 12/ 24-hr Time Mode Setting the Time Setting the Year, Date and Month Features Indoor Temperature, Humidity, & Comfort Level Indicator Outdoor Temperature and Humidity Minimum & Maximum Records (Indoor, Outdoor, & Resetting) Adding Remote Temperature/Humidity Sensor Units (Set-Up, Viewing, & Operation) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information Page 3 4 5 6 7 8 8-9 9 10 11 12 12-15 16-17 17-19 20 20 21 22-24 2 INVENTORY OF CONTENTS 1. One remote temperature/humidity sensor with mounting bracket (Figure 2). Figure 1 Figure 2 Battery compartment Battery cover ADDITIONAL EQUIPMENT (not included) 1. Two fresh AAA 1. 5V batteries (for indoor weather station) Two fresh AAA 1. 5V batteries (for temperature/humidity sensor) One Philips screwdriver One Standard screwdriver 3 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. [. . . ] The time of the maximum humidity reading is displayed in the time/date portion of the LCD. "MAX" remains above the temperature and the humidity and bar graph remain flashing. The date of the maximum humidity reading is displayed in the time/ date portion of the LCD. "MIN" appears above the temperature and the humidity and bar graph flashes. The time of the minimum humidity reading is displayed in the time/ date portion of the LCD 17. "MIN" remains above the temperature and the humidity and bar graph remain flashing a. The date of the minimum humidity reading is displayed in the time/ date portion of the LCD 19. Press and release the MIN/MAX/ + button to exit the indoor MIN/MAX mode. "MIN" appears above the temperature and the humidity and bar graph flashes. The time of the minimum humidity reading is displayed in the time/ date portion of the LCD 17. "MIN" remains above the temperature and the humidity and bar graph remain flashing a. The date of the minimum humidity reading is displayed in the time/ date portion of the LCD 19. Press and release the MIN/MAX/ + button to exit the indoor MIN/MAX mode. RESETTING THE MIMIMUM AND MAXIMUM RECORDS While viewing any of the MIN/MAX records, pressing the IN/OUT, SET/CH button will reset only the record being viewed to the current time and date. 8. 15 IV. ADDING REMOTE TEMPERATURE/HUMIDITY SENSORS (OPTIONAL) The WS-7138U is able to receive signals from 2 different remote temperature/humidity sensors. The remote temperature/humidity sensor model(s) that you choose will come with their own set of instructions-- follow these instructions for a complete guide to setting up. Following are some brief instructions for the basic set-up of remote temperature/humidity sensor units with the WS-7138U. These extra sensors can be purchased through the same dealer as this unit, or by contacting La Crosse Technology directly. A TX6U will monitor temperature only, a TX4U will monitor the temperature and humidity, a TX7U will monitor the temperature and humidity and display those values on a built in display, a TX3U will monitor temperature and display the temperature on its LCD, and the TX3UP will monitor the temperature via a probe for use in pools, spas, etc. Note: When setting up multiple units it is important to remove the batteries from all existing units in operation, then to insert batteries first into all the remote temperature/humidity sensor units, and in numeric sequence. Transmission problems will arise if this is not done correctly and if the total time for setup exceeds 6 minutes. It is necessary to remove the batteries from all units currently in operation. [. . . ] This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. [. . . ]