User manual LA CROSSE TECHNOLOGY WS-8054U

[. . . ] A team of atomic physicists is continually measuring every second, of every day, to an accuracy of ten billionths of a second per day. These physicists have created an international standard, measuring a second as 9, 192, 631, 770 vibrations of a Cesium-133 atom in a vacuum. GB P. 4 P. 5 GB QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the temperature clock and remote temperature sensor 3 to 5 apart. Place the batteries into the remote temperature sensor first then into the temperature clock. [. . . ] Note: when setting the hour, "PM" will appear to the left of the hour display, if it is AM nothing will be displayed. Press and release the "SET" button to confirm the hour setting, and to shift to select the minutes. Press and release the "SET" button to confirm the time setting, and to advance to manually set the calendar. GB P. 18 P. 19 GB VI) CALENDAR SETTING Note: When the WWVB signal is found, that date will over-ride the manually set date. 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press and release the "SET" button 5 more times until the default year "00" flashes in the date LCD. 3) Press and release the "SET" button to confirm the year and to move to select the month. Press and release the "+" button to select the appropriate month. 5) Press and release the "SET" button to confirm the month and to move to select the date. Press and release the "+" button to select the appropriate date. 7) Press and release the "SET" button to confirm the date and to move to select the weekday. 8) The default weekday "MON" (depends on selected language) will flash. Press and release the "+" button to select the appropriate weekday. 9) Press and release the "SET" button to confirm the calendar settings and to advance to select either 12 or 24-hour time display. VII) 12/24-HOUR SETTING 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press and release the "SET" button 9 more times until the "12" hour time display flashes in the time LCD. P. 21 GB P. 20 GB 2) Press and release the "+" button to toggle between 12 and 24 hour time. 3) Press and release the "SET" button to confirm the 12/24-hour time display and to advance to select either °F or °C. VIII) SELECTING °F OR °C 1) Hold down the "SET" button for 2 seconds (the selected time zone will flash), press and release the "SET" button 10 more times until the default "°F" flashes in the time LCD. 2) Press and release the "+" button to toggle between °F and °C. 3) Press and release the "SET" button to confirm the °F or °C selection and exit the Program Mode. FEATURES & OPERATIONS I) CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE) There are three possible display modes to view the day, seconds, and temperature. The month & date/ weekday /indoor temperature/remote temperature is the default. 2) The display should now show the month&date/ seconds/indoor temperature/ remote temperature 3) Press and release the "+" button a second time. 4) The display will now show the month&date/weekday/ seconds/remote temperature P. 23 GB P. 22 GB 5) Press and release the "+" button a third time and the display will return to the normal display. II) THE ALARM 1) SETTING THE ALARM Note: The duration of the alarm is 85 seconds. [. . . ] THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. For warranty work, technical support, or information contact: La Crosse Technology, Ltd 2809 Losey Blvd S. La Crosse, WI 54601 Phone: 608. 782. 1610 Fax: 608. 796. 1020 e-mail: support@lacrossetechnology. com (warranty work) sales@lacrossetechnology. com (information on other products) web: www. lacrossetechnology. com 2 FCC DISCLAIMER This device complies with part 15 of the FCC rules. [. . . ]